* S3: Implement IAM defaults and STS signing key fallback logic * S3: Refactor startup order to init SSE-S3 key manager before IAM * S3: Derive STS signing key from KEK using HKDF for security isolation * S3: Document STS signing key fallback in security.toml * fix(s3api): refine anonymous access logic and secure-by-default behavior - Initialize anonymous identity by default in `NewIdentityAccessManagement` to prevent nil pointer exceptions. - Ensure `ReplaceS3ApiConfiguration` preserves the anonymous identity if not present in the new configuration. - Update `NewIdentityAccessManagement` signature to accept `filerClient`. - In legacy mode (no policy engine), anonymous defaults to Deny (no actions), preserving secure-by-default behavior. - Use specific `LookupAnonymous` method instead of generic map lookup. - Update tests to accommodate signature changes and verify improved anonymous handling. * feat(s3api): make IAM configuration optional - Start S3 API server without a configuration file if `EnableIam` option is set. - Default to `Allow` effect for policy engine when no configuration is provided (Zero-Config mode). - Handle empty configuration path gracefully in `loadIAMManagerFromConfig`. - Add integration test `iam_optional_test.go` to verify empty config behavior. * fix(iamapi): fix signature mismatch in NewIdentityAccessManagementWithStore * fix(iamapi): properly initialize FilerClient instead of passing nil * fix(iamapi): properly initialize filer client for IAM management - Instead of passing `nil`, construct a `wdclient.FilerClient` using the provided `Filers` addresses. - Ensure `NewIdentityAccessManagementWithStore` receives a valid `filerClient` to avoid potential nil pointer dereferences or limited functionality. * clean: remove dead code in s3api_server.go * refactor(s3api): improve IAM initialization, safety and anonymous access security * fix(s3api): ensure IAM config loads from filer after client init * fix(s3): resolve test failures in integration, CORS, and tagging tests - Fix CORS tests by providing explicit anonymous permissions config - Fix S3 integration tests by setting admin credentials in init - Align tagging test credentials in CI with IAM defaults - Added goroutine to retry IAM config load in iamapi server * fix(s3): allow anonymous access to health targets and S3 Tables when identities are present * fix(ci): use /healthz for Caddy health check in awscli tests * iam, s3api: expose DefaultAllow from IAM and Policy Engine This allows checking the global "Open by Default" configuration from other components like S3 Tables. * s3api/s3tables: support DefaultAllow in permission logic and handler Updated CheckPermissionWithContext to respect the DefaultAllow flag in PolicyContext. This enables "Open by Default" behavior for unauthenticated access in zero-config environments. Added a targeted unit test to verify the logic. * s3api/s3tables: propagate DefaultAllow through handlers Propagated the DefaultAllow flag to individual handlers for namespaces, buckets, tables, policies, and tagging. This ensures consistent "Open by Default" behavior across all S3 Tables API endpoints. * s3api: wire up DefaultAllow for S3 Tables API initialization Updated registerS3TablesRoutes to query the global IAM configuration and set the DefaultAllow flag on the S3 Tables API server. This completes the end-to-end propagation required for anonymous access in zero-config environments. Added a SetDefaultAllow method to S3TablesApiServer to facilitate this. * s3api: fix tests by adding DefaultAllow to mock IAM integrations The IAMIntegration interface was updated to include DefaultAllow(), breaking several mock implementations in tests. This commit fixes the build errors by adding the missing method to the mocks. * env * ensure ports * env * env * fix default allow * add one more test using non-anonymous user * debug * add more debug * less logs
167 lines
6.8 KiB
Go
167 lines
6.8 KiB
Go
package iceberg
|
|
|
|
import (
|
|
"net/http"
|
|
|
|
"github.com/gorilla/mux"
|
|
"github.com/seaweedfs/seaweedfs/weed/glog"
|
|
"github.com/seaweedfs/seaweedfs/weed/pb/filer_pb"
|
|
"github.com/seaweedfs/seaweedfs/weed/s3api/s3_constants"
|
|
"github.com/seaweedfs/seaweedfs/weed/s3api/s3err"
|
|
"github.com/seaweedfs/seaweedfs/weed/s3api/s3tables"
|
|
)
|
|
|
|
// FilerClient provides access to the filer for storage operations.
|
|
type FilerClient interface {
|
|
WithFilerClient(streamingMode bool, fn func(client filer_pb.SeaweedFilerClient) error) error
|
|
}
|
|
|
|
type S3Authenticator interface {
|
|
AuthenticateRequest(r *http.Request) (string, interface{}, s3err.ErrorCode)
|
|
DefaultAllow() bool
|
|
}
|
|
|
|
// Server implements the Iceberg REST Catalog API.
|
|
type Server struct {
|
|
filerClient FilerClient
|
|
tablesManager *s3tables.Manager
|
|
prefix string // optional prefix for routes
|
|
authenticator S3Authenticator
|
|
}
|
|
|
|
// NewServer creates a new Iceberg REST Catalog server.
|
|
func NewServer(filerClient FilerClient, authenticator S3Authenticator) *Server {
|
|
manager := s3tables.NewManager()
|
|
return &Server{
|
|
filerClient: filerClient,
|
|
tablesManager: manager,
|
|
prefix: "",
|
|
authenticator: authenticator,
|
|
}
|
|
}
|
|
|
|
// RegisterRoutes registers Iceberg REST API routes on the provided router.
|
|
func (s *Server) RegisterRoutes(router *mux.Router) {
|
|
// Add middleware to log all requests/responses
|
|
router.Use(loggingMiddleware)
|
|
|
|
// Configuration endpoint - no auth needed for config
|
|
router.HandleFunc("/v1/config", s.handleConfig).Methods(http.MethodGet)
|
|
|
|
// Namespace endpoints - wrapped with Auth middleware
|
|
router.HandleFunc("/v1/namespaces", s.Auth(s.handleListNamespaces)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/namespaces", s.Auth(s.handleCreateNamespace)).Methods(http.MethodPost)
|
|
router.HandleFunc("/v1/namespaces/{namespace}", s.Auth(s.handleGetNamespace)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/namespaces/{namespace}", s.Auth(s.handleNamespaceExists)).Methods(http.MethodHead)
|
|
router.HandleFunc("/v1/namespaces/{namespace}", s.Auth(s.handleDropNamespace)).Methods(http.MethodDelete)
|
|
|
|
// Table endpoints - wrapped with Auth middleware
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables", s.Auth(s.handleListTables)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables", s.Auth(s.handleCreateTable)).Methods(http.MethodPost)
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables/{table}", s.Auth(s.handleLoadTable)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables/{table}", s.Auth(s.handleTableExists)).Methods(http.MethodHead)
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables/{table}", s.Auth(s.handleDropTable)).Methods(http.MethodDelete)
|
|
router.HandleFunc("/v1/namespaces/{namespace}/tables/{table}", s.Auth(s.handleUpdateTable)).Methods(http.MethodPost)
|
|
|
|
// With prefix support - wrapped with Auth middleware
|
|
router.HandleFunc("/v1/{prefix}/namespaces", s.Auth(s.handleListNamespaces)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/{prefix}/namespaces", s.Auth(s.handleCreateNamespace)).Methods(http.MethodPost)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}", s.Auth(s.handleGetNamespace)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}", s.Auth(s.handleNamespaceExists)).Methods(http.MethodHead)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}", s.Auth(s.handleDropNamespace)).Methods(http.MethodDelete)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables", s.Auth(s.handleListTables)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables", s.Auth(s.handleCreateTable)).Methods(http.MethodPost)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables/{table}", s.Auth(s.handleLoadTable)).Methods(http.MethodGet)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables/{table}", s.Auth(s.handleTableExists)).Methods(http.MethodHead)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables/{table}", s.Auth(s.handleDropTable)).Methods(http.MethodDelete)
|
|
router.HandleFunc("/v1/{prefix}/namespaces/{namespace}/tables/{table}", s.Auth(s.handleUpdateTable)).Methods(http.MethodPost)
|
|
|
|
// Catch-all for debugging
|
|
router.PathPrefix("/").HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
|
|
glog.V(2).Infof("Catch-all route hit: %s %s", r.Method, r.RequestURI)
|
|
writeError(w, http.StatusNotFound, "NotFound", "Path not found")
|
|
})
|
|
|
|
glog.V(2).Infof("Registered Iceberg REST Catalog routes")
|
|
}
|
|
|
|
func loggingMiddleware(next http.Handler) http.Handler {
|
|
return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
|
|
glog.V(2).Infof("Iceberg REST request: %s %s from %s", r.Method, r.RequestURI, r.RemoteAddr)
|
|
|
|
// Log all headers for debugging
|
|
glog.V(2).Infof("Iceberg REST headers:")
|
|
for name, values := range r.Header {
|
|
for _, value := range values {
|
|
// Redact sensitive headers
|
|
if name == "Authorization" && len(value) > 20 {
|
|
glog.V(2).Infof(" %s: %s...%s", name, value[:20], value[len(value)-10:])
|
|
} else {
|
|
glog.V(2).Infof(" %s: %s", name, value)
|
|
}
|
|
}
|
|
}
|
|
|
|
// Create a response writer that captures the status code
|
|
wrapped := &responseWriter{ResponseWriter: w}
|
|
next.ServeHTTP(wrapped, r)
|
|
|
|
glog.V(2).Infof("Iceberg REST response: %s %s -> %d", r.Method, r.RequestURI, wrapped.statusCode)
|
|
})
|
|
}
|
|
|
|
type responseWriter struct {
|
|
http.ResponseWriter
|
|
statusCode int
|
|
}
|
|
|
|
func (w *responseWriter) WriteHeader(code int) {
|
|
w.statusCode = code
|
|
w.ResponseWriter.WriteHeader(code)
|
|
}
|
|
|
|
func (s *Server) Auth(handler http.HandlerFunc) http.HandlerFunc {
|
|
return func(w http.ResponseWriter, r *http.Request) {
|
|
if s.authenticator == nil {
|
|
writeError(w, http.StatusUnauthorized, "NotAuthorizedException", "Authentication required")
|
|
return
|
|
}
|
|
|
|
identityName, identity, errCode := s.authenticator.AuthenticateRequest(r)
|
|
if errCode != s3err.ErrNone {
|
|
// If authentication failed but DefaultAllow is enabled, proceed without identity
|
|
if s.authenticator.DefaultAllow() {
|
|
glog.V(2).Infof("Iceberg: AuthenticateRequest failed (%v), but DefaultAllow is true, proceeding", errCode)
|
|
} else {
|
|
apiErr := s3err.GetAPIError(errCode)
|
|
errorType := "RESTException"
|
|
switch apiErr.HTTPStatusCode {
|
|
case http.StatusForbidden:
|
|
errorType = "ForbiddenException"
|
|
case http.StatusUnauthorized:
|
|
errorType = "NotAuthorizedException"
|
|
case http.StatusBadRequest:
|
|
errorType = "BadRequestException"
|
|
case http.StatusInternalServerError:
|
|
errorType = "InternalServerError"
|
|
}
|
|
writeError(w, apiErr.HTTPStatusCode, errorType, apiErr.Description)
|
|
return
|
|
}
|
|
}
|
|
|
|
if identityName != "" || identity != nil {
|
|
ctx := r.Context()
|
|
if identityName != "" {
|
|
ctx = s3_constants.SetIdentityNameInContext(ctx, identityName)
|
|
}
|
|
if identity != nil {
|
|
ctx = s3_constants.SetIdentityInContext(ctx, identity)
|
|
}
|
|
r = r.WithContext(ctx)
|
|
}
|
|
|
|
handler(w, r)
|
|
}
|
|
}
|