* Add volume dir tags to topology
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add preferred tag config for EC
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Prioritize EC destinations by tags
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add EC placement planner tag tests
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Refactor EC placement tests to reuse buildActiveTopology
Remove buildActiveTopologyWithDiskTags helper function and consolidate
tag setup inline in test cases. Tests now use UpdateTopology to apply
tags after topology creation, reusing the existing buildActiveTopology
function rather than duplicating its logic.
All tag scenario tests pass:
- TestECPlacementPlannerPrefersTaggedDisks
- TestECPlacementPlannerFallsBackWhenTagsInsufficient
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Consolidate normalizeTagList into shared util package
Extract normalizeTagList from three locations (volume.go,
detection.go, erasure_coding_handler.go) into new weed/util/tag.go
as exported NormalizeTagList function. Replace all duplicate
implementations with imports and calls to util.NormalizeTagList.
This improves code reuse and maintainability by centralizing
tag normalization logic.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add PreferredTags to EC config persistence
Add preferred_tags field to ErasureCodingTaskConfig protobuf with field
number 5. Update GetConfigSpec to include preferred_tags field in the
UI configuration schema. Add PreferredTags to ToTaskPolicy to serialize
config to protobuf. Add PreferredTags to FromTaskPolicy to deserialize
from protobuf with defensive copy to prevent external mutation.
This allows EC preferred tags to be persisted and restored across
worker restarts.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add defensive copy for Tags slice in DiskLocation
Copy the incoming tags slice in NewDiskLocation instead of storing
by reference. This prevents external callers from mutating the
DiskLocation.Tags slice after construction, improving encapsulation
and preventing unexpected changes to disk metadata.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add doc comment to buildCandidateSets method
Document the tiered candidate selection and fallback behavior. Explain
that for a planner with preferredTags, it accumulates disks matching
each tag in order into progressively larger tiers, emits a candidate
set once a tier reaches shardsNeeded, and finally falls back to the
full candidates set if preferred-tag tiers are insufficient.
This clarifies the intended semantics for future maintainers.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Apply final PR review fixes
1. Update parseVolumeTags to replicate single tag entry to all folders
instead of leaving some folders with nil tags. This prevents nil
pointer dereferences when processing folders without explicit tags.
2. Add defensive copy in ToTaskPolicy for PreferredTags slice to match
the pattern used in FromTaskPolicy, preventing external mutation of
the returned TaskPolicy.
3. Add clarifying comment in buildCandidateSets explaining that the
shardsNeeded <= 0 branch is a defensive check for direct callers,
since selectDestinations guarantees shardsNeeded > 0.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Fix nil pointer dereference in parseVolumeTags
Ensure all folder tags are initialized to either normalized tags or
empty slices, not nil. When multiple tag entries are provided and there
are more folders than entries, remaining folders now get empty slices
instead of nil, preventing nil pointer dereference in downstream code.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Fix NormalizeTagList to return empty slice instead of nil
Change NormalizeTagList to always return a non-nil slice. When all tags
are empty or whitespace after normalization, return an empty slice
instead of nil. This prevents nil pointer dereferences in downstream
code that expects a valid (possibly empty) slice.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add nil safety check for v.tags pointer
Add a safety check to handle the case where v.tags might be nil,
preventing a nil pointer dereference. If v.tags is nil, use an empty
string instead. This is defensive programming to prevent panics in
edge cases.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Add volume.tags flag to weed server and weed mini commands
Add the volume.tags CLI option to both the 'weed server' and 'weed mini'
commands. This allows users to specify disk tags when running the
combined server modes, just like they can with 'weed volume'.
The flag uses the same format and description as the volume command:
comma-separated tag groups per data dir with ':' separators
(e.g. fast:ssd,archive).
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Capture global MiniClusterCtx into local variables before goroutine/select
evaluation to prevent nil dereference/data race when context is reset to nil
after nil check. Applied to filer, master, volume, and s3 commands.
- Introduce MiniClusterCtx to coordinate shutdown across mini services
- Update Master, Volume, Filer, S3, and WebDAV servers to respect context cancellation
- Ensure all resources are cleaned up properly during test teardown
- Integrate MiniClusterCtx in s3tables integration tests
* Add consistent -debug and -debug.port flags to commands
Add -debug and -debug.port flags to weed master, weed volume, weed s3,
weed mq.broker, and weed filer.sync commands for consistency with
weed filer.
When -debug is enabled, an HTTP server starts on the specified port
(default 6060) serving runtime profiling data at /debug/pprof/.
For mq.broker, replaced the older -port.pprof flag with the new
-debug and -debug.port pattern for consistency.
* Update weed/util/grace/pprof.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
Change all concurrentUploadLimitMB and concurrentDownloadLimitMB defaults
from fixed values (64, 128, 256 MB) to 0 (unlimited).
This removes artificial throttling that can limit throughput on high-performance
systems, especially on all-flash setups with many cores.
Files changed:
- volume.go: concurrentUploadLimitMB 256->0, concurrentDownloadLimitMB 256->0
- server.go: filer/volume/s3 concurrent limits 64/128->0
- s3.go: concurrentUploadLimitMB 128->0
- filer.go: concurrentUploadLimitMB 128->0, s3.concurrentUploadLimitMB 128->0
Users can still set explicit limits if needed for resource management.
* pb: add id field to Heartbeat message for stable volume server identification
This adds an 'id' field to the Heartbeat protobuf message that allows
volume servers to identify themselves independently of their IP:port address.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* storage: add Id field to Store struct
Add Id field to Store struct and include it in CollectHeartbeat().
The Id field provides a stable volume server identity independent of IP:port.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* topology: support id-based DataNode identification
Update GetOrCreateDataNode to accept an id parameter for stable node
identification. When id is provided, the DataNode can maintain its identity
even when its IP address changes (e.g., in Kubernetes pod reschedules).
For backward compatibility:
- If id is provided, use it as the node ID
- If id is empty, fall back to ip:port
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* volume: add -id flag for stable volume server identity
Add -id command line flag to volume server that allows specifying a stable
identifier independent of the IP address. This is useful for Kubernetes
deployments with hostPath volumes where pods can be rescheduled to different
nodes while the persisted data remains on the original node.
Usage: weed volume -id=node-1 -ip=10.0.0.1 ...
If -id is not specified, it defaults to ip:port for backward compatibility.
Fixes https://github.com/seaweedfs/seaweedfs/issues/7487
* server: add -volume.id flag to weed server command
Support the -volume.id flag in the all-in-one 'weed server' command,
consistent with the standalone 'weed volume' command.
Usage: weed server -volume.id=node-1 ...
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* topology: add test for id-based DataNode identification
Test the key scenarios:
1. Create DataNode with explicit id
2. Same id with different IP returns same DataNode (K8s reschedule)
3. IP/PublicUrl are updated when node reconnects with new address
4. Different id creates new DataNode
5. Empty id falls back to ip:port (backward compatibility)
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* pb: add address field to DataNodeInfo for proper node addressing
Previously, DataNodeInfo.Id was used as the node address, which worked
when Id was always ip:port. Now that Id can be an explicit string,
we need a separate Address field for connection purposes.
Changes:
- Add 'address' field to DataNodeInfo protobuf message
- Update ToDataNodeInfo() to populate the address field
- Update NewServerAddressFromDataNode() to use Address (with Id fallback)
- Fix LookupEcVolume to use dn.Url() instead of dn.Id()
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: trim whitespace from volume server id and fix test
- Trim whitespace from -id flag to treat ' ' as empty
- Fix store_load_balancing_test.go to include id parameter in NewStore call
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* refactor: extract GetVolumeServerId to util package
Move the volume server ID determination logic to a shared utility function
to avoid code duplication between volume.go and rack.go.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: improve transition logic for legacy nodes
- Use exact ip:port match instead of net.SplitHostPort heuristic
- Update GrpcPort and PublicUrl during transition for consistency
- Remove unused net import
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: add id normalization and address change logging
- Normalize id parameter at function boundary (trim whitespace)
- Log when DataNode IP:Port changes (helps debug K8s pod rescheduling)
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* adjust "weed benchmark" CLI to use readOnly/writeOnly
* consistently use "-master" CLI option
* If both -readOnly and -writeOnly are specified, the current logic silently allows it with -writeOnly taking precedence. This is confusing and could lead to unexpected behavior.
* Added/Updated:
- Added metrics ip options for all servers;
- Fixed a bug with the selection of the binIp or ip parameter for the metrics handler;
* Fixed cmd flags
* types packages is imported more than onece
* lazy-loading
* fix bugs
* fix bugs
* fix unit tests
* fix test error
* rename function
* unload ldb after initial startup
* Don't load ldb when starting volume server if ldbtimeout is set.
* remove uncessary unloadldb
* Update weed/command/server.go
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* Update weed/command/volume.go
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
Co-authored-by: guol-fnst <goul-fnst@fujitsu.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* simplify a bit
* feat: volume: add "readBufSize" option to customize read optimization
* refactor : redbufSIze -> readBufferSize
* simplify a bit
* simplify a bit
* volume server:set the default value of "hasSlowRead" to true
* simplify a bit
* feat: volume: add "readBufSize" option to customize read optimization
* refactor : redbufSIze -> readBufferSize
* simplify a bit
* simplify a bit
