* set working directory
* consolidate to worker directory
* working directory
* correct directory name
* refactoring to use wildcard matcher
* simplify
* cleaning ec working directory
* fix reference
* clean
* adjust test
* S3: Implement IAM defaults and STS signing key fallback logic
* S3: Refactor startup order to init SSE-S3 key manager before IAM
* S3: Derive STS signing key from KEK using HKDF for security isolation
* S3: Document STS signing key fallback in security.toml
* fix(s3api): refine anonymous access logic and secure-by-default behavior
- Initialize anonymous identity by default in `NewIdentityAccessManagement` to prevent nil pointer exceptions.
- Ensure `ReplaceS3ApiConfiguration` preserves the anonymous identity if not present in the new configuration.
- Update `NewIdentityAccessManagement` signature to accept `filerClient`.
- In legacy mode (no policy engine), anonymous defaults to Deny (no actions), preserving secure-by-default behavior.
- Use specific `LookupAnonymous` method instead of generic map lookup.
- Update tests to accommodate signature changes and verify improved anonymous handling.
* feat(s3api): make IAM configuration optional
- Start S3 API server without a configuration file if `EnableIam` option is set.
- Default to `Allow` effect for policy engine when no configuration is provided (Zero-Config mode).
- Handle empty configuration path gracefully in `loadIAMManagerFromConfig`.
- Add integration test `iam_optional_test.go` to verify empty config behavior.
* fix(iamapi): fix signature mismatch in NewIdentityAccessManagementWithStore
* fix(iamapi): properly initialize FilerClient instead of passing nil
* fix(iamapi): properly initialize filer client for IAM management
- Instead of passing `nil`, construct a `wdclient.FilerClient` using the provided `Filers` addresses.
- Ensure `NewIdentityAccessManagementWithStore` receives a valid `filerClient` to avoid potential nil pointer dereferences or limited functionality.
* clean: remove dead code in s3api_server.go
* refactor(s3api): improve IAM initialization, safety and anonymous access security
* fix(s3api): ensure IAM config loads from filer after client init
* fix(s3): resolve test failures in integration, CORS, and tagging tests
- Fix CORS tests by providing explicit anonymous permissions config
- Fix S3 integration tests by setting admin credentials in init
- Align tagging test credentials in CI with IAM defaults
- Added goroutine to retry IAM config load in iamapi server
* fix(s3): allow anonymous access to health targets and S3 Tables when identities are present
* fix(ci): use /healthz for Caddy health check in awscli tests
* iam, s3api: expose DefaultAllow from IAM and Policy Engine
This allows checking the global "Open by Default" configuration from
other components like S3 Tables.
* s3api/s3tables: support DefaultAllow in permission logic and handler
Updated CheckPermissionWithContext to respect the DefaultAllow flag
in PolicyContext. This enables "Open by Default" behavior for
unauthenticated access in zero-config environments. Added a targeted
unit test to verify the logic.
* s3api/s3tables: propagate DefaultAllow through handlers
Propagated the DefaultAllow flag to individual handlers for
namespaces, buckets, tables, policies, and tagging. This ensures
consistent "Open by Default" behavior across all S3 Tables API
endpoints.
* s3api: wire up DefaultAllow for S3 Tables API initialization
Updated registerS3TablesRoutes to query the global IAM configuration
and set the DefaultAllow flag on the S3 Tables API server. This
completes the end-to-end propagation required for anonymous access in
zero-config environments. Added a SetDefaultAllow method to
S3TablesApiServer to facilitate this.
* s3api: fix tests by adding DefaultAllow to mock IAM integrations
The IAMIntegration interface was updated to include DefaultAllow(),
breaking several mock implementations in tests. This commit fixes
the build errors by adding the missing method to the mocks.
* env
* ensure ports
* env
* env
* fix default allow
* add one more test using non-anonymous user
* debug
* add more debug
* less logs
* test: add Trino Iceberg catalog integration test
- Create test/s3/catalog_trino/trino_catalog_test.go with TestTrinoIcebergCatalog
- Tests integration between Trino SQL engine and SeaweedFS Iceberg REST catalog
- Starts weed mini with all services and Trino in Docker container
- Validates Iceberg catalog schema creation and listing operations
- Uses native S3 filesystem support in Trino with path-style access
- Add workflow job to s3-tables-tests.yml for CI execution
* fix: preserve AWS environment credentials when replacing S3 configuration
When S3 configuration is loaded from filer/db, it replaces the identities list
and inadvertently removes AWS_ACCESS_KEY_ID credentials that were added from
environment variables. This caused auth to remain disabled even though valid
credentials were present.
Fix by preserving environment-based identities when replacing the configuration
and re-adding them after the replacement. This ensures environment credentials
persist across configuration reloads and properly enable authentication.
* fix: use correct ServerAddress format with gRPC port encoding
The admin server couldn't connect to master because the master address
was missing the gRPC port information. Use pb.NewServerAddress() which
properly encodes both HTTP and gRPC ports in the address string.
Changes:
- weed/command/mini.go: Use pb.NewServerAddress for master address in admin
- test/s3/policy/policy_test.go: Store and use gRPC ports for master/filer addresses
This fix applies to:
1. Admin server connection to master (mini.go)
2. Test shell commands that need master/filer addresses (policy_test.go)
* move
* move
* fix: always include gRPC port in server address encoding
The NewServerAddress() function was omitting the gRPC port from the address
string when it matched the port+10000 convention. However, gRPC port allocation
doesn't always follow this convention - when the calculated port is busy, an
alternative port is allocated.
This caused a bug where:
1. Master's gRPC port was allocated as 50661 (sequential, not port+10000)
2. Address was encoded as '192.168.1.66:50660' (gRPC port omitted)
3. Admin client called ToGrpcAddress() which assumed port+10000 offset
4. Admin tried to connect to 60660 but master was on 50661 → connection failed
Fix: Always include explicit gRPC port in address format (host:httpPort.grpcPort)
unless gRPC port is 0. This makes addresses unambiguous and works regardless of
the port allocation strategy used.
Impacts: All server-to-server gRPC connections now use properly formatted addresses.
* test: fix Iceberg REST API readiness check
The Iceberg REST API endpoints require authentication. When checked without
credentials, the API returns 403 Forbidden (not 401 Unauthorized). The
readiness check now accepts both auth error codes (401/403) as indicators
that the service is up and ready, it just needs credentials.
This fixes the 'Iceberg REST API did not become ready' test failure.
* Fix AWS SigV4 signature verification for base64-encoded payload hashes
AWS SigV4 canonical requests must use hex-encoded SHA256 hashes,
but the X-Amz-Content-Sha256 header may be transmitted as base64.
Changes:
- Added normalizePayloadHash() function to convert base64 to hex
- Call normalizePayloadHash() in extractV4AuthInfoFromHeader()
- Added encoding/base64 import
Fixes 403 Forbidden errors on POST requests to Iceberg REST API
when clients send base64-encoded content hashes in the header.
Impacted services: Iceberg REST API, S3Tables
* Fix AWS SigV4 signature verification for base64-encoded payload hashes
AWS SigV4 canonical requests must use hex-encoded SHA256 hashes,
but the X-Amz-Content-Sha256 header may be transmitted as base64.
Changes:
- Added normalizePayloadHash() function to convert base64 to hex
- Call normalizePayloadHash() in extractV4AuthInfoFromHeader()
- Added encoding/base64 import
- Removed unused fmt import
Fixes 403 Forbidden errors on POST requests to Iceberg REST API
when clients send base64-encoded content hashes in the header.
Impacted services: Iceberg REST API, S3Tables
* pass sigv4
* s3api: fix identity preservation and logging levels
- Ensure environment-based identities are preserved during config replacement
- Update accessKeyIdent and nameToIdentity maps correctly
- Downgrade informational logs to V(2) to reduce noise
* test: fix trino integration test and s3 policy test
- Pin Trino image version to 479
- Fix port binding to 0.0.0.0 for Docker connectivity
- Fix S3 policy test hang by correctly assigning MiniClusterCtx
- Improve port finding robustness in policy tests
* ci: pre-pull trino image to avoid timeouts
- Pull trinodb/trino:479 after Docker setup
- Ensure image is ready before integration tests start
* iceberg: remove unused checkAuth and improve logging
- Remove unused checkAuth method
- Downgrade informational logs to V(2)
- Ensure loggingMiddleware uses a status writer for accurate reported codes
- Narrow catch-all route to avoid interfering with other subsystems
* iceberg: fix build failure by removing unused s3api import
* Update iceberg.go
* use warehouse
* Update trino_catalog_test.go
* Add shared s3tables manager
* Add s3tables shell commands
* Add s3tables admin API
* Add s3tables admin UI
* Fix admin s3tables namespace create
* Rename table buckets menu
* Centralize s3tables tag validation
* Reuse s3tables manager in admin
* Extract s3tables list limit
* Add s3tables bucket ARN helper
* Remove write middleware from s3tables APIs
* Fix bucket link and policy hint
* Fix table tag parsing and nav link
* Disable namespace table link on invalid ARN
* Improve s3tables error decode
* Return flag parse errors for s3tables tag
* Accept query params for namespace create
* Bind namespace create form data
* Read s3tables JS data from DOM
* s3tables: allow empty region ARN
* shell: pass s3tables account id
* shell: require account for table buckets
* shell: use bucket name for namespaces
* shell: use bucket name for tables
* shell: use bucket name for tags
* admin: add table buckets links in file browser
* s3api: reuse s3tables tag validation
* admin: harden s3tables UI handlers
* fix admin list table buckets
* allow admin s3tables access
* validate s3tables bucket tags
* log s3tables bucket metadata errors
* rollback table bucket on owner failure
* show s3tables bucket owner
* add s3tables iam conditions
* Add s3tables user permissions UI
* Authorize s3tables using identity actions
* Add s3tables permissions to user modal
* Disambiguate bucket scope in user permissions
* Block table bucket names that match S3 buckets
* Pretty-print IAM identity JSON
* Include tags in s3tables permission context
* admin: refactor S3 Tables inline JavaScript into a separate file
* s3tables: extend IAM policy condition operators support
* shell: use LookupEntry wrapper for s3tables bucket conflict check
* admin: handle buildBucketPermissions validation in create/update flows
Make ListTables authorization consistent with GetTable/CreateTable:
1. ListTables authorization now evaluates policies instead of owner-only checks:
- For namespace listing: checks namespace policy AND bucket policy
- For bucket-wide listing: checks bucket policy
- Uses CanListTables permission framework
2. Remove owner-only filter in listTablesWithClient that prevented policy-based
sharing of tables. Authorization is now enforced at the handler level, so all
tables in the namespace/bucket are returned to authorized callers (who have
access either via ownership or policy).
3. Add flexible PolicyDocument.UnmarshalJSON to support both single-object and
array forms of Statement field:
- Handles: {"Statement": {...}}
- Handles: {"Statement": [{...}, {...}]}
- Improves AWS IAM compatibility
This ensures cross-account table listing works when delegated via bucket/namespace
policies, consistent with the authorization model for other operations.
Implement resource-specific policy validation to prevent over-broad
permission grants. Add matchesResource and matchesResourcePattern functions
to validate statement Resource fields against specific resource ARNs.
Add new CheckPermissionWithResource function that includes resource ARN
validation, while keeping CheckPermission unchanged for backward compatibility.
This enables policies to grant access to specific resources only:
- statements with Resource: "arn:aws:s3tables:...:bucket/specific-bucket/*"
will only match when accessing that specific bucket
- statements without Resource field match all resources (implicit *)
- resource patterns support wildcards (* for any sequence, ? for single char)
For future use: Handlers can call CheckPermissionWithResource with the
target resource ARN to enforce resource-level access control.
Add automatic normalization of operations to full IAM-style action names
(e.g., 's3tables:CreateTableBucket') in CheckPermission(). This ensures
policy statements using prefixed actions (s3tables:*) correctly match
operations evaluated by permission helpers.
Also fixes incorrect r.Context() passed to GetIdentityNameFromContext
which expects *http.Request. Now passes r directly.
Replace the custom suffix-only wildcard implementation in matchesActionPattern
and matchesPrincipal with the policy_engine.MatchesWildcard function from
PR #8052. This enables full wildcard support including:
- Middle wildcards: s3tables:Get*Table matches GetTable
- Question mark wildcards: Get? matches any single character
- Combined patterns: s3tables:*Table* matches any action containing 'Table'
Benefits:
- Code reuse: eliminates duplicate wildcard logic
- Complete IAM compatibility: supports all AWS wildcard patterns
- Performance: uses efficient O(n) backtracking algorithm
- Consistency: same wildcard behavior across S3 API and S3 Tables
Add comprehensive unit tests covering exact matches, suffix wildcards,
middle wildcards, question marks, and combined patterns for both action
and principal matching.
- Add CanTagResource() to check TagResource permission
- Add CanUntagResource() to check UntagResource permission
- Update CanManageTags() to check both operations (OR logic)
This prevents UntagResource from incorrectly checking 'ManageTags' permission
and ensures each operation validates the correct permission when per-operation
permissions are enforced.
- Add authorization checks to all S3 Tables handlers (policy, table ops) to enforce security
- Improve error handling to distinguish between NotFound (404) and InternalError (500)
- Fix directory FileMode usage in filer_ops
- Improve test randomness for version tokens
- Update permissions comments to acknowledge IAM gaps
- Update handleGetNamespace to distinguish between 404 and 500 errors
- Refactor CanManagePolicy to use CheckPermission for consistent enforcement
- Ensure empty identities are correctly handled in policy management checks
- Remove mandatory ACTION_ADMIN at the router level
- Enforce granular permissions in bucket and namespace handlers
- Prioritize AccountID in ExtractPrincipalFromContext for ARN matching
- Distinguish between 404 (NoSuchBucket) and 500 (InternalError) in metadata lookups
- Clean up unused imports in s3api_tables.go
- Add multi-segment namespace support to ARN parsing
- Refactor permission checking to use map lookup
- Wrap lookup errors with ErrNotFound in filer operations
- Standardize splitPath to use path package
- Add permissions.go with permission definitions and checks
- Define permissions for all 21 S3 Tables operations
- Add permission checking helper functions
- Add getPrincipalFromRequest to extract caller identity
- Implement access control in CreateTableBucket, GetTableBucket, DeleteTableBucket
- Return 403 Forbidden for unauthorized operations
- Only bucket owner can perform operations (extensible for future policies)
- Add AuthError type for authorization failures
