* Fix STS InvalidAccessKeyId and request body consumption in Lakekeeper integration test
* Remove debug prints
* Add Lakekeeper integration tests to CI
* Fix connection refused in CI by binding to 0.0.0.0
* Add timeout to docker run in Lakekeeper integration test
* Update weed/s3api/auth_credentials.go
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Temporary credentials from STS AssumeRole were using "AKIA" prefix
(permanent IAM user credentials) instead of "ASIA" prefix (temporary
security credentials). This violates AWS conventions and may cause
compatibility issues with AWS SDKs that validate credential types.
Changes:
- Rename generateAccessKeyId to generateTemporaryAccessKeyId for clarity
- Update function to use ASIA prefix for temporary credentials
- Add unit tests to verify ASIA prefix format (weed/iam/sts/credential_prefix_test.go)
- Add integration test to verify ASIA prefix in S3 API (test/s3/iam/s3_sts_credential_prefix_test.go)
- Ensure AWS-compatible credential format (ASIA + 16 hex chars)
The credentials are already deterministic (SHA256-based from session ID)
and the SessionToken is correctly set to the JWT token, so this is just
a prefix fix to follow AWS standards.
Fixes#8312
* Fix STS AssumeRole with POST body param and add integration test
* Add STS integration test to CI workflow
* Address code review feedback: fix HPP vulnerability and style issues
* Refactor: address code review feedback
- Fix HTTP Parameter Pollution vulnerability in UnifiedPostHandler
- Refactor permission check logic for better readability
- Extract test helpers to testutil/docker.go to reduce duplication
- Clean up imports and simplify context setting
* Add SigV4-style test variant for AssumeRole POST body routing
- Added ActionInBodyWithSigV4Style test case to validate real-world scenario
- Test confirms routing works correctly for AWS SigV4-signed requests
- Addresses code review feedback about testing with SigV4 signatures
* Fix: always set identity in context when non-nil
- Ensure UnifiedPostHandler always calls SetIdentityInContext when identity is non-nil
- Only call SetIdentityNameInContext when identity.Name is non-empty
- This ensures downstream handlers (embeddedIam.DoActions) always have access to identity
- Addresses potential issue where empty identity.Name would skip context setting
* Add Iceberg table details view
* Enhance Iceberg catalog browsing UI
* Fix Iceberg UI security and logic issues
- Fix selectSchema() and partitionFieldsFromFullMetadata() to always search for matching IDs instead of checking != 0
- Fix snapshotsFromFullMetadata() to defensive-copy before sorting to prevent mutating caller's slice
- Fix XSS vulnerabilities in s3tables.js: replace innerHTML with textContent/createElement for user-controlled data
- Fix deleteIcebergTable() to redirect to namespace tables list on details page instead of reloading
- Fix data-bs-target in iceberg_namespaces.templ: remove templ.SafeURL for CSS selector
- Add catalogName to delete modal data attributes for proper redirect
- Remove unused hidden inputs from create table form (icebergTableBucketArn, icebergTableNamespace)
* Regenerate templ files for Iceberg UI updates
* Support complex Iceberg type objects in schema
Change Type field from string to json.RawMessage in both IcebergSchemaFieldInfo
and internal icebergSchemaField to properly handle Iceberg spec's complex type
objects (e.g. {"type": "struct", "fields": [...]}). Currently test data
only shows primitive string types, but this change makes the implementation
defensively robust for future complex types by preserving the exact JSON
representation. Add typeToString() helper and update schema extraction
functions to marshal string types as JSON. Update template to convert
json.RawMessage to string for display.
* Regenerate templ files for Type field changes
* templ
* Fix additional Iceberg UI issues from code review
- Fix lazy-load flag that was set before async operation completed, preventing retries
on error; now sets loaded flag only after successful load and throws error to caller
for proper error handling and UI updates
- Add zero-time guards for CreatedAt and ModifiedAt fields in table details to avoid
displaying Go zero-time values; render dash when time is zero
- Add URL path escaping for all catalog/namespace/table names in URLs to prevent
malformed URLs when names contain special characters like /, ?, or #
- Remove redundant innerHTML clear in loadIcebergNamespaceTables that cleared twice
before appending the table list
- Fix selectSnapshotForMetrics to remove != 0 guard for consistency with selectSchema
fix; now always searches for CurrentSnapshotID without zero-value gate
- Enhance typeToString() helper to display '(complex)' for non-primitive JSON types
* Regenerate templ files for Phase 3 updates
* Fix template generation to use correct file paths
Run templ generate from repo root instead of weed/admin directory to ensure
generated _templ.go files have correct absolute paths in error messages
(e.g., 'weed/admin/view/app/iceberg_table_details.templ' instead of
'app/iceberg_table_details.templ'). This ensures both 'make admin-generate'
at repo root and 'make generate' in weed/admin directory produce identical
output with consistent file path references.
* Regenerate template files with correct path references
* Validate S3 Tables names in UI
- Add client-side validation for table bucket and namespace names to surface
errors for invalid characters (dots/underscores) before submission
- Use HTML validity messages with reportValidity for immediate feedback
- Update namespace helper text to reflect actual constraints (single-level,
lowercase letters, numbers, and underscores)
* Regenerate templ files for namespace helper text
* Fix Iceberg catalog REST link and actions
* Disallow S3 object access on table buckets
* Validate Iceberg layout for table bucket objects
* Fix REST API link to /v1/config
* merge iceberg page with table bucket page
* Allowed Trino/Iceberg stats files in metadata validation
* fixes
- Backend/data handling:
- Normalized Iceberg type display and fallback handling in weed/admin/dash/s3tables_management.go.
- Fixed snapshot fallback pointer semantics in weed/admin/dash/s3tables_management.go.
- Added CSRF token generation/propagation/validation for namespace create/delete in:
- weed/admin/dash/csrf.go
- weed/admin/dash/auth_middleware.go
- weed/admin/dash/middleware.go
- weed/admin/dash/s3tables_management.go
- weed/admin/view/layout/layout.templ
- weed/admin/static/js/s3tables.js
- UI/template fixes:
- Zero-time guards for CreatedAt fields in:
- weed/admin/view/app/iceberg_namespaces.templ
- weed/admin/view/app/iceberg_tables.templ
- Fixed invalid templ-in-script interpolation and host/port rendering in:
- weed/admin/view/app/iceberg_catalog.templ
- weed/admin/view/app/s3tables_buckets.templ
- Added data-catalog-name consistency on Iceberg delete action in weed/admin/view/app/iceberg_tables.templ.
- Updated retry wording in weed/admin/static/js/s3tables.js.
- Regenerated all affected _templ.go files.
- S3 API/comment follow-ups:
- Reused cached table-bucket validator in weed/s3api/bucket_paths.go.
- Added validation-failure debug logging in weed/s3api/s3api_object_handlers_tagging.go.
- Added multipart path-validation design comment in weed/s3api/s3api_object_handlers_multipart.go.
- Build tooling:
- Fixed templ generate working directory issues in weed/admin/Makefile (watch + pattern rule).
* populate data
* test/s3tables: harden populate service checks
* admin: skip table buckets in object-store bucket list
* admin sidebar: move object store to top-level links
* admin iceberg catalog: guard zero times and escape links
* admin forms: add csrf/error handling and client-side name validation
* admin s3tables: fix namespace delete modal redeclaration
* admin: replace native confirm dialogs with modal helpers
* admin modal-alerts: remove noisy confirm usage console log
* reduce logs
* test/s3tables: use partitioned tables in trino and spark populate
* admin file browser: normalize filer ServerAddress for HTTP parsing
* Add Spark Iceberg catalog integration tests and CI support
Implement comprehensive integration tests for Spark with SeaweedFS Iceberg REST catalog:
- Basic CRUD operations (Create, Read, Update, Delete) on Iceberg tables
- Namespace (database) management
- Data insertion, querying, and deletion
- Time travel capabilities via snapshot versioning
- Compatible with SeaweedFS S3 and Iceberg REST endpoints
Tests mirror the structure of existing Trino integration tests but use Spark's
Python SQL API and PySpark for testing.
Add GitHub Actions CI job for spark-iceberg-catalog-tests in s3-tables-tests.yml
to automatically run Spark integration tests on pull requests.
* fmt
* Fix Spark integration tests - code review feedback
* go mod tidy
* Add go mod tidy step to integration test jobs
Add 'go mod tidy' step before test runs for all integration test jobs:
- s3-tables-tests
- iceberg-catalog-tests
- trino-iceberg-catalog-tests
- spark-iceberg-catalog-tests
This ensures dependencies are clean before running tests.
* Fix remaining Spark operations test issues
Address final code review comments:
Setup & Initialization:
- Add waitForSparkReady() helper function that polls Spark readiness
with backoff instead of hardcoded 10-second sleep
- Extract setupSparkTestEnv() helper to reduce boilerplate duplication
between TestSparkCatalogBasicOperations and TestSparkTimeTravel
- Both tests now use helpers for consistent, reliable setup
Assertions & Validation:
- Make setup-critical operations (namespace, table creation, initial
insert) use t.Fatalf instead of t.Errorf to fail fast
- Validate setupSQL output in TestSparkTimeTravel and fail if not
'Setup complete'
- Add validation after second INSERT in TestSparkTimeTravel:
verify row count increased to 2 before time travel test
- Add context to error messages with namespace and tableName params
Code Quality:
- Remove code duplication between test functions
- All critical paths now properly validated
- Consistent error handling throughout
* Fix go vet errors in S3 Tables tests
Fixes:
1. setup_test.go (Spark):
- Add missing import: github.com/testcontainers/testcontainers-go/wait
- Use wait.ForLog instead of undefined testcontainers.NewLogStrategy
- Remove unused strings import
2. trino_catalog_test.go:
- Use net.JoinHostPort instead of fmt.Sprintf for address formatting
- Properly handles IPv6 addresses by wrapping them in brackets
* Use weed mini for simpler SeaweedFS startup
Replace complex multi-process startup (master, volume, filer, s3)
with single 'weed mini' command that starts all services together.
Benefits:
- Simpler, more reliable startup
- Single weed mini process vs 4 separate processes
- Automatic coordination between components
- Better port management with no manual coordination
Changes:
- Remove separate master, volume, filer process startup
- Use weed mini with -master.port, -filer.port, -s3.port flags
- Keep Iceberg REST as separate service (still needed)
- Increase timeout to 15s for port readiness (weed mini startup)
- Remove volumePort and filerProcess fields from TestEnvironment
- Simplify cleanup to only handle two processes (mini, iceberg rest)
* Clean up dead code and temp directory leaks
Fixes:
1. Remove dead s3Process field and cleanup:
- weed mini bundles S3 gateway, no separate process needed
- Removed s3Process field from TestEnvironment
- Removed unnecessary s3Process cleanup code
2. Fix temp config directory leak:
- Add sparkConfigDir field to TestEnvironment
- Store returned configDir in writeSparkConfig
- Clean up sparkConfigDir in Cleanup() with os.RemoveAll
- Prevents accumulation of temp directories in test runs
3. Simplify Cleanup:
- Now handles only necessary processes (weed mini, iceberg rest)
- Removes both seaweedfsDataDir and sparkConfigDir
- Cleaner shutdown sequence
* Use weed mini's built-in Iceberg REST and fix python binary
Changes:
- Add -s3.port.iceberg flag to weed mini for built-in Iceberg REST Catalog
- Remove separate 'weed server' process for Iceberg REST
- Remove icebergRestProcess field from TestEnvironment
- Simplify Cleanup() to only manage weed mini + Spark
- Add port readiness check for iceberg REST from weed mini
- Set Spark container Cmd to '/bin/sh -c sleep 3600' to keep it running
- Change python to python3 in container.Exec calls
This simplifies to truly one all-in-one weed mini process (master, filer, s3,
iceberg-rest) plus just the Spark container.
* go fmt
* clean up
* bind on a non-loopback IP for container access, aligned Iceberg metadata saves/locations with table locations, and reworked Spark time travel to use TIMESTAMP AS OF with safe timestamp extraction.
* shared mini start
* Fixed internal directory creation under /buckets so .objects paths can auto-create without failing bucket-name validation, which restores table bucket object writes
* fix path
Updated table bucket objects to write under `/buckets/<bucket>` and saved Iceberg metadata there, adjusting Spark time-travel timestamp to committed_at +1s. Rebuilt the weed binary (`go
install ./weed`) and confirmed passing tests for Spark and Trino with focused test commands.
* Updated table bucket creation to stop creating /buckets/.objects and switched Trino REST warehouse to s3://<bucket> to match Iceberg layout.
* Stabilize S3Tables integration tests
* Fix timestamp extraction and remove dead code in bucketDir
* Use table bucket as warehouse in s3tables tests
* Update trino_blog_operations_test.go
* adds the CASCADE option to handle any remaining table metadata/files in the schema directory
* skip namespace not empty
* Add Trino blog operations test
* Update test/s3tables/catalog_trino/trino_blog_operations_test.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* feat: add table bucket path helpers and filer operations
- Add table object root and table location mapping directories
- Implement ensureDirectory, upsertFile, deleteEntryIfExists helpers
- Support table location bucket mapping for S3 access
* feat: manage table bucket object roots on creation/deletion
- Create .objects directory for table buckets on creation
- Clean up table object bucket paths on deletion
- Enable S3 operations on table bucket object roots
* feat: add table location mapping for Iceberg REST
- Track table location bucket mappings when tables are created/updated/deleted
- Enable location-based routing for S3 operations on table data
* feat: route S3 operations to table bucket object roots
- Route table-s3 bucket names to mapped table paths
- Route table buckets to object root directories
- Support table location bucket mapping lookup
* feat: emit table-s3 locations from Iceberg REST
- Generate unique table-s3 bucket names with UUID suffix
- Store table metadata under table bucket paths
- Return table-s3 locations for Trino compatibility
* fix: handle missing directories in S3 list operations
- Propagate ErrNotFound from ListEntries for non-existent directories
- Treat missing directories as empty results for list operations
- Fixes Trino non-empty location checks on table creation
* test: improve Trino CSV parsing for single-value results
- Sanitize Trino output to skip jline warnings
- Handle single-value CSV results without header rows
- Strip quotes from numeric values in tests
* refactor: use bucket path helpers throughout S3 API
- Replace direct bucket path operations with helper functions
- Leverage centralized table bucket routing logic
- Improve maintainability with consistent path resolution
* fix: add table bucket cache and improve filer error handling
- Cache table bucket lookups to reduce filer overhead on repeated checks
- Use filer_pb.CreateEntry and filer_pb.UpdateEntry helpers to check resp.Error
- Fix delete order in handler_bucket_get_list_delete: delete table object before directory
- Make location mapping errors best-effort: log and continue, don't fail API
- Update table location mappings to delete stale prior bucket mappings on update
- Add 1-second sleep before timestamp time travel query to ensure timestamps are in past
- Fix CSV parsing: examine all lines, not skip first; handle single-value rows
* fix: properly handle stale metadata location mapping cleanup
- Capture oldMetadataLocation before mutation in handleUpdateTable
- Update updateTableLocationMapping to accept both old and new locations
- Use passed-in oldMetadataLocation to detect location changes
- Delete stale mapping only when location actually changes
- Pass empty string for oldLocation in handleCreateTable (new tables have no prior mapping)
- Improve logging to show old -> new location transitions
* refactor: cleanup imports and cache design
- Remove unused 'sync' import from bucket_paths.go
- Use filer_pb.UpdateEntry helper in setExtendedAttribute and deleteExtendedAttribute for consistent error handling
- Add dedicated tableBucketCache map[string]bool to BucketRegistry instead of mixing concerns with metadataCache
- Improve cache separation: table buckets cache is now separate from bucket metadata cache
* fix: improve cache invalidation and add transient error handling
Cache invalidation (critical fix):
- Add tableLocationCache to BucketRegistry for location mapping lookups
- Clear tableBucketCache and tableLocationCache in RemoveBucketMetadata
- Prevents stale cache entries when buckets are deleted/recreated
Transient error handling:
- Only cache table bucket lookups when conclusive (found or ErrNotFound)
- Skip caching on transient errors (network, permission, etc)
- Prevents marking real table buckets as non-table due to transient failures
Performance optimization:
- Cache tableLocationDir results to avoid repeated filer RPCs on hot paths
- tableLocationDir now checks cache before making expensive filer lookups
- Cache stores empty string for 'not found' to avoid redundant lookups
Code clarity:
- Add comment to deleteDirectory explaining DeleteEntry response lacks Error field
* go fmt
* fix: mirror transient error handling in tableLocationDir and optimize bucketDir
Transient error handling:
- tableLocationDir now only caches definitive results
- Mirrors isTableBucket behavior to prevent treating transient errors as permanent misses
- Improves reliability on flaky systems or during recovery
Performance optimization:
- bucketDir avoids redundant isTableBucket call via bucketRoot
- Directly use s3a.option.BucketsPath for regular buckets
- Saves one cache lookup for every non-table bucket operation
* fix: revert bucketDir optimization to preserve bucketRoot logic
The optimization to directly use BucketsPath bypassed bucketRoot's logic
and caused issues with S3 list operations on delimiter+prefix cases.
Revert to using path.Join(s3a.bucketRoot(bucket), bucket) which properly
handles all bucket types and ensures consistent path resolution across
the codebase.
The slight performance cost of an extra cache lookup is worth the correctness
and consistency benefits.
* feat: move table buckets under /buckets
Add a table-bucket marker attribute, reuse bucket metadata cache for table bucket detection, and update list/validation/UI/test paths to treat table buckets as /buckets entries.
* Fix S3 Tables code review issues
- handler_bucket_create.go: Fix bucket existence check to properly validate
entryResp.Entry before setting s3BucketExists flag (nil Entry should not
indicate existing bucket)
- bucket_paths.go: Add clarifying comment to bucketRoot() explaining unified
buckets root path for all bucket types
- file_browser_data.go: Optimize by extracting table bucket check early to
avoid redundant WithFilerClient call
* Fix list prefix delimiter handling
* Handle list errors conservatively
* Fix Trino FOR TIMESTAMP query - use past timestamp
Iceberg requires the timestamp to be strictly in the past.
Use current_timestamp - interval '1' second instead of current_timestamp.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix multipart etag
* address comments
* clean up
* clean up
* optimization
* address comments
* unquoted etag
* dedup
* upgrade
* clean
* etag
* return quoted tag
* quoted etag
* debug
* s3api: unify ETag retrieval and quoting across handlers
Refactor newListEntry to take *S3ApiServer and use getObjectETag,
and update setResponseHeaders to use the same logic. This ensures
consistent ETags are returned for both listing and direct access.
* s3api: implement ListObjects deduplication for versioned buckets
Handle duplicate entries between the main path and the .versions
directory by prioritizing the latest version when bucket versioning
is enabled.
* s3api: cleanup stale main file entries during versioned uploads
Add explicit deletion of pre-existing "main" files when creating new
versions in versioned buckets. This prevents stale entries from
appearing in bucket listings and ensures consistency.
* s3api: fix cleanup code placement in versioned uploads
Correct the placement of rm calls in completeMultipartUpload and
putVersionedObject to ensure stale main files are properly deleted
during versioned uploads.
* s3api: improve getObjectETag fallback for empty ExtETagKey
Ensure that when ExtETagKey exists but contains an empty value,
the function falls through to MD5/chunk-based calculation instead
of returning an empty string.
* s3api: fix test files for new newListEntry signature
Update test files to use the new newListEntry signature where the
first parameter is *S3ApiServer. Created mockS3ApiServer to properly
test owner display name lookup functionality.
* s3api: use filer.ETag for consistent Md5 handling in getEtagFromEntry
Change getEtagFromEntry fallback to use filer.ETag(entry) instead of
filer.ETagChunks to ensure legacy entries with Attributes.Md5 are
handled consistently with the rest of the codebase.
* s3api: optimize list logic and fix conditional header logging
- Hoist bucket versioning check out of per-entry callback to avoid
repeated getVersioningState calls
- Extract appendOrDedup helper function to eliminate duplicate
dedup/append logic across multiple code paths
- Change If-Match mismatch logging from glog.Errorf to glog.V(3).Infof
and remove DEBUG prefix for consistency
* s3api: fix test mock to properly initialize IAM accounts
Fixed nil pointer dereference in TestNewListEntryOwnerDisplayName by
directly initializing the IdentityAccessManagement.accounts map in the
test setup. This ensures newListEntry can properly look up account
display names without panicking.
* cleanup
* s3api: remove premature main file cleanup in versioned uploads
Removed incorrect cleanup logic that was deleting main files during
versioned uploads. This was causing test failures because it deleted
objects that should have been preserved as null versions when
versioning was first enabled. The deduplication logic in listing is
sufficient to handle duplicate entries without deleting files during
upload.
* s3api: add empty-value guard to getEtagFromEntry
Added the same empty-value guard used in getObjectETag to prevent
returning quoted empty strings. When ExtETagKey exists but is empty,
the function now falls through to filer.ETag calculation instead of
returning "".
* s3api: fix listing of directory key objects with matching prefix
Revert prefix handling logic to use strings.TrimPrefix instead of
checking HasPrefix with empty string result. This ensures that when a
directory key object exactly matches the prefix (e.g. prefix="dir/",
object="dir/"), it is correctly handled as a regular entry instead of
being skipped or incorrectly processed as a common prefix. Also fixed
missing variable definition.
* s3api: refactor list inline dedup to use appendOrDedup helper
Refactored the inline deduplication logic in listFilerEntries to use the
shared appendOrDedup helper function. This ensures consistent behavior
and reduces code duplication.
* test: fix port allocation race in s3tables integration test
Updated startMiniCluster to find all required ports simultaneously using
findAvailablePorts instead of sequentially. This prevents race conditions
where the OS reallocates a port that was just released, causing multiple
services (e.g. Filer and Volume) to be assigned the same port and fail
to start.
* test: add comprehensive CRUD tests for S3 Tables Catalog Trino integration
- Add TestNamespaceCRUD: Tests complete Create-Read-Update-Delete lifecycle for namespaces
- Add TestNamespaceListingPagination: Tests listing multiple namespaces with verification
- Add TestNamespaceErrorHandling: Tests error handling for edge cases (IF EXISTS, IF NOT EXISTS)
- Add TestSchemaIntegrationWithCatalog: Tests integration between Trino SQL and Iceberg REST Catalog
All tests pass successfully and use Trino SQL interface for practical integration testing.
Tests properly skip when Docker is unavailable.
Use randomized namespace names to avoid conflicts in parallel execution.
The tests provide comprehensive coverage of namespace/schema CRUD operations which form the
foundation of the Iceberg catalog integration with Trino.
* test: Address code review feedback for S3 Tables Catalog Trino CRUD tests
- Extract common test setup into setupTrinoTest() helper function
- Replace all fmt.Printf calls with idiomatic t.Logf
- Change namespace deletion verification from t.Logf to t.Errorf for proper test failures
- Enhance TestNamespaceErrorHandling with persistence verification test
- Remove unnecessary fmt import
- Improve test documentation with clarifying comments
* test: Fix schema naming and remove verbose output logging
- Fix TestNamespaceListingPagination schema name generation: use fmt.Sprintf instead of string(rune())
- Remove verbose logging of SHOW SCHEMAS output to reduce noise in test logs
- Keep high-level operation logging while removing detailed result output
* test: add Trino Iceberg catalog integration test
- Create test/s3/catalog_trino/trino_catalog_test.go with TestTrinoIcebergCatalog
- Tests integration between Trino SQL engine and SeaweedFS Iceberg REST catalog
- Starts weed mini with all services and Trino in Docker container
- Validates Iceberg catalog schema creation and listing operations
- Uses native S3 filesystem support in Trino with path-style access
- Add workflow job to s3-tables-tests.yml for CI execution
* fix: preserve AWS environment credentials when replacing S3 configuration
When S3 configuration is loaded from filer/db, it replaces the identities list
and inadvertently removes AWS_ACCESS_KEY_ID credentials that were added from
environment variables. This caused auth to remain disabled even though valid
credentials were present.
Fix by preserving environment-based identities when replacing the configuration
and re-adding them after the replacement. This ensures environment credentials
persist across configuration reloads and properly enable authentication.
* fix: use correct ServerAddress format with gRPC port encoding
The admin server couldn't connect to master because the master address
was missing the gRPC port information. Use pb.NewServerAddress() which
properly encodes both HTTP and gRPC ports in the address string.
Changes:
- weed/command/mini.go: Use pb.NewServerAddress for master address in admin
- test/s3/policy/policy_test.go: Store and use gRPC ports for master/filer addresses
This fix applies to:
1. Admin server connection to master (mini.go)
2. Test shell commands that need master/filer addresses (policy_test.go)
* move
* move
* fix: always include gRPC port in server address encoding
The NewServerAddress() function was omitting the gRPC port from the address
string when it matched the port+10000 convention. However, gRPC port allocation
doesn't always follow this convention - when the calculated port is busy, an
alternative port is allocated.
This caused a bug where:
1. Master's gRPC port was allocated as 50661 (sequential, not port+10000)
2. Address was encoded as '192.168.1.66:50660' (gRPC port omitted)
3. Admin client called ToGrpcAddress() which assumed port+10000 offset
4. Admin tried to connect to 60660 but master was on 50661 → connection failed
Fix: Always include explicit gRPC port in address format (host:httpPort.grpcPort)
unless gRPC port is 0. This makes addresses unambiguous and works regardless of
the port allocation strategy used.
Impacts: All server-to-server gRPC connections now use properly formatted addresses.
* test: fix Iceberg REST API readiness check
The Iceberg REST API endpoints require authentication. When checked without
credentials, the API returns 403 Forbidden (not 401 Unauthorized). The
readiness check now accepts both auth error codes (401/403) as indicators
that the service is up and ready, it just needs credentials.
This fixes the 'Iceberg REST API did not become ready' test failure.
* Fix AWS SigV4 signature verification for base64-encoded payload hashes
AWS SigV4 canonical requests must use hex-encoded SHA256 hashes,
but the X-Amz-Content-Sha256 header may be transmitted as base64.
Changes:
- Added normalizePayloadHash() function to convert base64 to hex
- Call normalizePayloadHash() in extractV4AuthInfoFromHeader()
- Added encoding/base64 import
Fixes 403 Forbidden errors on POST requests to Iceberg REST API
when clients send base64-encoded content hashes in the header.
Impacted services: Iceberg REST API, S3Tables
* Fix AWS SigV4 signature verification for base64-encoded payload hashes
AWS SigV4 canonical requests must use hex-encoded SHA256 hashes,
but the X-Amz-Content-Sha256 header may be transmitted as base64.
Changes:
- Added normalizePayloadHash() function to convert base64 to hex
- Call normalizePayloadHash() in extractV4AuthInfoFromHeader()
- Added encoding/base64 import
- Removed unused fmt import
Fixes 403 Forbidden errors on POST requests to Iceberg REST API
when clients send base64-encoded content hashes in the header.
Impacted services: Iceberg REST API, S3Tables
* pass sigv4
* s3api: fix identity preservation and logging levels
- Ensure environment-based identities are preserved during config replacement
- Update accessKeyIdent and nameToIdentity maps correctly
- Downgrade informational logs to V(2) to reduce noise
* test: fix trino integration test and s3 policy test
- Pin Trino image version to 479
- Fix port binding to 0.0.0.0 for Docker connectivity
- Fix S3 policy test hang by correctly assigning MiniClusterCtx
- Improve port finding robustness in policy tests
* ci: pre-pull trino image to avoid timeouts
- Pull trinodb/trino:479 after Docker setup
- Ensure image is ready before integration tests start
* iceberg: remove unused checkAuth and improve logging
- Remove unused checkAuth method
- Downgrade informational logs to V(2)
- Ensure loggingMiddleware uses a status writer for accurate reported codes
- Narrow catch-all route to avoid interfering with other subsystems
* iceberg: fix build failure by removing unused s3api import
* Update iceberg.go
* use warehouse
* Update trino_catalog_test.go
- Create test/s3/catalog_trino/trino_catalog_test.go with TestTrinoIcebergCatalog
- Tests integration between Trino SQL engine and SeaweedFS Iceberg REST catalog
- Starts weed mini with all services and Trino in Docker container
- Validates Iceberg catalog schema creation and listing operations
- Uses native S3 filesystem support in Trino with path-style access
- Add workflow job to s3-tables-tests.yml for CI execution
* full integration with iceberg-go
* Table Commit Operations (handleUpdateTable)
* s3tables: fix Iceberg v2 compliance and namespace properties
This commit ensures SeaweedFS Iceberg REST Catalog is compliant with
Iceberg Format Version 2 by:
- Using iceberg-go's table.NewMetadataWithUUID for strict v2 compliance.
- Explicitly initializing namespace properties to empty maps.
- Removing omitempty from required Iceberg response fields.
- Fixing CommitTableRequest unmarshaling using table.Requirements and table.Updates.
* s3tables: automate Iceberg integration tests
- Added Makefile for local test execution and cluster management.
- Added docker-compose for PyIceberg compatibility kit.
- Added Go integration test harness for PyIceberg.
- Updated GitHub CI to run Iceberg catalog tests automatically.
* s3tables: update PyIceberg test suite for compatibility
- Updated test_rest_catalog.py to use latest PyIceberg transaction APIs.
- Updated Dockerfile to include pyarrow and pandas dependencies.
- Improved namespace and table handling in integration tests.
* s3tables: address review feedback on Iceberg Catalog
- Implemented robust metadata version parsing and incrementing.
- Ensured table metadata changes are persisted during commit (handleUpdateTable).
- Standardized namespace property initialization for consistency.
- Fixed unused variable and incorrect struct field build errors.
* s3tables: finalize Iceberg REST Catalog and optimize tests
- Implemented robust metadata versioning and persistence.
- Standardized namespace property initialization.
- Optimized integration tests using pre-built Docker image.
- Added strict property persistence validation to test suite.
- Fixed build errors from previous partial updates.
* Address PR review: fix Table UUID stability, implement S3Tables UpdateTable, and support full metadata persistence individually
* fix: Iceberg catalog stable UUIDs, metadata persistence, and file writing
- Ensure table UUIDs are stable (do not regenerate on load).
- Persist full table metadata (Iceberg JSON) in s3tables extended attributes.
- Add `MetadataVersion` to explicitly track version numbers, replacing regex parsing.
- Implement `saveMetadataFile` to persist metadata JSON files to the Filer on commit.
- Update `CreateTable` and `UpdateTable` handlers to use the new logic.
* test: bind weed mini to 0.0.0.0 in integration tests to fix Docker connectivity
* Iceberg: fix metadata handling in REST catalog
- Add nil guard in createTable
- Fix updateTable to correctly load existing metadata from storage
- Ensure full metadata persistence on updates
- Populate loadTable result with parsed metadata
* S3Tables: add auth checks and fix response fields in UpdateTable
- Add CheckPermissionWithContext to UpdateTable handler
- Include TableARN and MetadataLocation in UpdateTable response
- Use ErrCodeConflict (409) for version token mismatches
* Tests: improve Iceberg catalog test infrastructure and cleanup
- Makefile: use PID file for precise process killing
- test_rest_catalog.py: remove unused variables and fix f-strings
* Iceberg: fix variable shadowing in UpdateTable
- Rename inner loop variable `req` to `requirement` to avoid shadowing outer request variable
* S3Tables: simplify MetadataVersion initialization
- Use `max(req.MetadataVersion, 1)` instead of anonymous function
* Tests: remove unicode characters from S3 tables integration test logs
- Remove unicode checkmarks from test output for cleaner logs
* Iceberg: improve metadata persistence robustness
- Fix MetadataLocation in LoadTableResult to fallback to generated location
- Improve saveMetadataFile to ensure directory hierarchy existence and robust error handling
* s3: enforce authentication and JSON error format for Iceberg REST Catalog
* s3/iceberg: align error exception types with OpenAPI spec examples
* s3api: refactor AuthenticateRequest to return identity object
* s3/iceberg: propagate full identity object to request context
* s3/iceberg: differentiate NotAuthorizedException and ForbiddenException
* s3/iceberg: reject requests if authenticator is nil to prevent auth bypass
* s3/iceberg: refactor Auth middleware to build context incrementally and use switch for error mapping
* s3api: update misleading comment for authRequestWithAuthType
* s3api: return ErrAccessDenied if IAM is not configured to prevent auth bypass
* s3/iceberg: optimize context update in Auth middleware
* s3api: export CanDo for external authorization use
* s3/iceberg: enforce identity-based authorization in all API handlers
* s3api: fix compilation errors by updating internal CanDo references
* s3/iceberg: robust identity validation and consistent action usage in handlers
* s3api: complete CanDo rename across tests and policy engine integration
* s3api: fix integration tests by allowing admin access when auth is disabled and explicit gRPC ports
* duckdb
* create test bucket
* feat: Add Iceberg REST Catalog server
Implement Iceberg REST Catalog API on a separate port (default 8181)
that exposes S3 Tables metadata through the Apache Iceberg REST protocol.
- Add new weed/s3api/iceberg package with REST handlers
- Implement /v1/config endpoint returning catalog configuration
- Implement namespace endpoints (list/create/get/head/delete)
- Implement table endpoints (list/create/load/head/delete/update)
- Add -port.iceberg flag to S3 standalone server (s3.go)
- Add -s3.port.iceberg flag to combined server mode (server.go)
- Add -s3.port.iceberg flag to mini cluster mode (mini.go)
- Support prefix-based routing for multiple catalogs
The Iceberg REST server reuses S3 Tables metadata storage under
/table-buckets and enables DuckDB, Spark, and other Iceberg clients
to connect to SeaweedFS as a catalog.
* feat: Add Iceberg Catalog pages to admin UI
Add admin UI pages to browse Iceberg catalogs, namespaces, and tables.
- Add Iceberg Catalog menu item under Object Store navigation
- Create iceberg_catalog.templ showing catalog overview with REST info
- Create iceberg_namespaces.templ listing namespaces in a catalog
- Create iceberg_tables.templ listing tables in a namespace
- Add handlers and routes in admin_handlers.go
- Add Iceberg data provider methods in s3tables_management.go
- Add Iceberg data types in types.go
The Iceberg Catalog pages provide visibility into the same S3 Tables
data through an Iceberg-centric lens, including REST endpoint examples
for DuckDB and PyIceberg.
* test: Add Iceberg catalog integration tests and reorg s3tables tests
- Reorganize existing s3tables tests to test/s3tables/table-buckets/
- Add new test/s3tables/catalog/ for Iceberg REST catalog tests
- Add TestIcebergConfig to verify /v1/config endpoint
- Add TestIcebergNamespaces to verify namespace listing
- Add TestDuckDBIntegration for DuckDB connectivity (requires Docker)
- Update CI workflow to use new test paths
* fix: Generate proper random UUIDs for Iceberg tables
Address code review feedback:
- Replace placeholder UUID with crypto/rand-based UUID v4 generation
- Add detailed TODO comments for handleUpdateTable stub explaining
the required atomic metadata swap implementation
* fix: Serve Iceberg on localhost listener when binding to different interface
Address code review feedback: properly serve the localhost listener
when the Iceberg server is bound to a non-localhost interface.
* ci: Add Iceberg catalog integration tests to CI
Add new job to run Iceberg catalog tests in CI, along with:
- Iceberg package build verification
- Iceberg unit tests
- Iceberg go vet checks
- Iceberg format checks
* fix: Address code review feedback for Iceberg implementation
- fix: Replace hardcoded account ID with s3_constants.AccountAdminId in buildTableBucketARN()
- fix: Improve UUID generation error handling with deterministic fallback (timestamp + PID + counter)
- fix: Update handleUpdateTable to return HTTP 501 Not Implemented instead of fake success
- fix: Better error handling in handleNamespaceExists to distinguish 404 from 500 errors
- fix: Use relative URL in template instead of hardcoded localhost:8181
- fix: Add HTTP timeout to test's waitForService function to avoid hangs
- fix: Use dynamic ephemeral ports in integration tests to avoid flaky parallel failures
- fix: Add Iceberg port to final port configuration logging in mini.go
* fix: Address critical issues in Iceberg implementation
- fix: Cache table UUIDs to ensure persistence across LoadTable calls
The UUID now remains stable for the lifetime of the server session.
TODO: For production, UUIDs should be persisted in S3 Tables metadata.
- fix: Remove redundant URL-encoded namespace parsing
mux router already decodes %1F to \x1F before passing to handlers.
Redundant ReplaceAll call could cause bugs with literal %1F in namespace.
* fix: Improve test robustness and reduce code duplication
- fix: Make DuckDB test more robust by failing on unexpected errors
Instead of silently logging errors, now explicitly check for expected
conditions (extension not available) and skip the test appropriately.
- fix: Extract username helper method to reduce duplication
Created getUsername() helper in AdminHandlers to avoid duplicating
the username retrieval logic across Iceberg page handlers.
* fix: Add mutex protection to table UUID cache
Protects concurrent access to the tableUUIDs map with sync.RWMutex.
Uses read-lock for fast path when UUID already cached, and write-lock
for generating new UUIDs. Includes double-check pattern to handle race
condition between read-unlock and write-lock.
* style: fix go fmt errors
* feat(iceberg): persist table UUID in S3 Tables metadata
* feat(admin): configure Iceberg port in Admin UI and commands
* refactor: address review comments (flags, tests, handlers)
- command/mini: fix tracking of explicit s3.port.iceberg flag
- command/admin: add explicit -iceberg.port flag
- admin/handlers: reuse getUsername helper
- tests: use 127.0.0.1 for ephemeral ports and os.Stat for file size check
* test: check error from FileStat in verify_gc_empty_test
Add *testing.T field to TestCluster struct and initialize it in
startMiniCluster. This allows Stop() to properly log warnings when
cluster shutdown times out. Includes the t field in the test cluster
initialization and restores the logging statement in Stop().
The TestCluster.Stop() method doesn't have access to testing.T object.
Remove the log statement and keep the timeout handling comment for clarity.
The original intent (warning about shutdown timeout) is still captured in
the code comment explaining potential issues.
The timeout path (2 second wait for graceful shutdown) was silent. Add a
warning log message when it occurs to help diagnose flaky test issues and
indicate when the mini cluster didn't shut down cleanly.
Updated random string generation to use crypto/rand in s3tables tests.
Increased resilience of IAM distributed tests by adding "connection refused"
to retryable errors.
- Add authorization checks to all S3 Tables handlers (policy, table ops) to enforce security
- Improve error handling to distinguish between NotFound (404) and InternalError (500)
- Fix directory FileMode usage in filer_ops
- Improve test randomness for version tokens
- Update permissions comments to acknowledge IAM gaps
- Introduce sync.Mutex to protect global state (os.Args, os.Chdir)
- Ensure serialized initialization of the mini cluster runner
- Fix intermittent race conditions during parallel test execution
- Implement doRequestAndDecode to eliminate HTTP boilerplate
- Update client API to accept []string for namespaces to support hierarchy
- Standardize error response decoding across all client methods
- Introduce MiniClusterCtx to coordinate shutdown across mini services
- Update Master, Volume, Filer, S3, and WebDAV servers to respect context cancellation
- Ensure all resources are cleaned up properly during test teardown
- Integrate MiniClusterCtx in s3tables integration tests
- Move all client methods to client.go
- Remove duplicate types/constants from s3tables_integration_test.go
- Keep setup.go for test infrastructure
- Keep integration test logic in s3tables_integration_test.go
- Clean up unused imports
- Test compiles successfully
- Create setup.go with TestCluster and S3TablesClient definitions
- Create client.go with HTTP client methods for all operations
- Test utilities and client methods organized for reusability
- Foundation for S3 Tables integration tests
* Implement IAM propagation to S3 servers
- Add PropagatingCredentialStore to propagate IAM changes to S3 servers via gRPC
- Add Policy management RPCs to S3 proto and S3ApiServer
- Update CredentialManager to use PropagatingCredentialStore when MasterClient is available
- Wire FilerServer to enable propagation
* Implement parallel IAM propagation and fix S3 cluster registration
- Parallelized IAM change propagation with 10s timeout.
- Refined context usage in PropagatingCredentialStore.
- Added S3Type support to cluster node management.
- Enabled S3 servers to register with gRPC address to the master.
- Ensured IAM configuration reload after policy updates via gRPC.
* Optimize IAM propagation with direct in-memory cache updates
* Secure IAM propagation: Use metadata to skip persistence only on propagation
* pb: refactor IAM and S3 services for unidirectional IAM propagation
- Move SeaweedS3IamCache service from iam.proto to s3.proto.
- Remove legacy IAM management RPCs and empty SeaweedS3 service from s3.proto.
- Enforce that S3 servers only use the synchronization interface.
* pb: regenerate Go code for IAM and S3 services
Updated generated code following the proto refactoring of IAM synchronization services.
* s3api: implement read-only mode for Embedded IAM API
- Add readOnly flag to EmbeddedIamApi to reject write operations via HTTP.
- Enable read-only mode by default in S3ApiServer.
- Handle AccessDenied error in writeIamErrorResponse.
- Embed SeaweedS3IamCacheServer in S3ApiServer.
* credential: refactor PropagatingCredentialStore for unidirectional IAM flow
- Update to use s3_pb.SeaweedS3IamCacheClient for propagation to S3 servers.
- Propagate full Identity object via PutIdentity for consistency.
- Remove redundant propagation of specific user/account/policy management RPCs.
- Add timeout context for propagation calls.
* s3api: implement SeaweedS3IamCacheServer for unidirectional sync
- Update S3ApiServer to implement the cache synchronization gRPC interface.
- Methods (PutIdentity, RemoveIdentity, etc.) now perform direct in-memory cache updates.
- Register SeaweedS3IamCacheServer in command/s3.go.
- Remove registration for the legacy and now empty SeaweedS3 service.
* s3api: update tests for read-only IAM and propagation
- Added TestEmbeddedIamReadOnly to verify rejection of write operations in read-only mode.
- Update test setup to pass readOnly=false to NewEmbeddedIamApi in routing tests.
- Updated EmbeddedIamApiForTest helper with read-only checks matching production behavior.
* s3api: add back temporary debug logs for IAM updates
Log IAM updates received via:
- gRPC propagation (PutIdentity, PutPolicy, etc.)
- Metadata configuration reloads (LoadS3ApiConfigurationFromCredentialManager)
- Core identity management (UpsertIdentity, RemoveIdentity)
* IAM: finalize propagation fix with reduced logging and clarified architecture
* Allow configuring IAM read-only mode for S3 server integration tests
* s3api: add defensive validation to UpsertIdentity
* s3api: fix log message to reference correct IAM read-only flag
* test/s3/iam: ensure WaitForS3Service checks for IAM write permissions
* test: enable writable IAM in Makefile for integration tests
* IAM: add GetPolicy/ListPolicies RPCs to s3.proto
* S3: add GetBucketPolicy and ListBucketPolicies helpers
* S3: support storing generic IAM policies in IdentityAccessManagement
* S3: implement IAM policy RPCs using IdentityAccessManagement
* IAM: fix stale user identity on rename propagation
* Update IAM and S3 protobuf definitions for explicit IAM gRPC APIs
* Refactor s3api: Extract generic ExecuteAction method for IAM operations
* Implement explicit IAM gRPC APIs in S3 server
* iam: remove deprecated GetConfiguration and PutConfiguration RPCs
* iamapi: refactor handlers to use CredentialManager directly
* s3api: refactor embedded IAM to use CredentialManager directly
* server: remove deprecated configuration gRPC handlers
* credential/grpc: refactor configuration calls to return error
* shell: update s3.configure to list users instead of full config
* s3api: fix CreateServiceAccount gRPC handler to map required fields
* s3api: fix UpdateServiceAccount gRPC handler to map fields and safe status
* s3api: enforce UserName in embedded IAM ListAccessKeys
* test: fix test_config.json structure to match proto definition
* Revert "credential/grpc: refactor configuration calls to return error"
This reverts commit cde707dd8b88c7d1bd730271518542eceb5ed069.
* Revert "server: remove deprecated configuration gRPC handlers"
This reverts commit 7307e205a083c8315cf84ddc2614b3e50eda2e33.
* Revert "s3api: enforce UserName in embedded IAM ListAccessKeys"
This reverts commit adf727ba52b4f3ffb911f0d0df85db858412ff83.
* Revert "s3api: fix UpdateServiceAccount gRPC handler to map fields and safe status"
This reverts commit 6a4be3314d43b6c8fda8d5e0558e83e87a19df3f.
* Revert "s3api: fix CreateServiceAccount gRPC handler to map required fields"
This reverts commit 9bb4425f07fbad38fb68d33e5c0aa573d8912a37.
* Revert "shell: update s3.configure to list users instead of full config"
This reverts commit f3304ead537b3e6be03d46df4cb55983ab931726.
* Revert "s3api: refactor embedded IAM to use CredentialManager directly"
This reverts commit 9012f27af82d11f0e824877712a5ae2505a65f86.
* Revert "iamapi: refactor handlers to use CredentialManager directly"
This reverts commit 3a148212236576b0a3aa4d991c2abb014fb46091.
* Revert "iam: remove deprecated GetConfiguration and PutConfiguration RPCs"
This reverts commit e16e08aa0099699338d3155bc7428e1051ce0a6a.
* s3api: address IAM code review comments (error handling, logging, gRPC response mapping)
* s3api: add robustness to startup by retrying KEK and IAM config loading from Filer
* s3api: address IAM gRPC code review comments (safety, validation, status logic)
* fix return
* Add IAM gRPC service definition
- Add GetConfiguration/PutConfiguration for config management
- Add CreateUser/GetUser/UpdateUser/DeleteUser/ListUsers for user management
- Add CreateAccessKey/DeleteAccessKey/GetUserByAccessKey for access key management
- Methods mirror existing IAM HTTP API functionality
* Add IAM gRPC handlers on filer server
- Implement IamGrpcServer with CredentialManager integration
- Handle configuration get/put operations
- Handle user CRUD operations
- Handle access key create/delete operations
- All methods delegate to CredentialManager for actual storage
* Wire IAM gRPC service to filer server
- Add CredentialManager field to FilerOption and FilerServer
- Import credential store implementations in filer command
- Initialize CredentialManager from credential.toml if available
- Register IAM gRPC service on filer gRPC server
- Enable credential management via gRPC alongside existing filer services
* Regenerate IAM protobuf with gRPC service methods
* iam_pb: add Policy Management to protobuf definitions
* credential: implement PolicyManager in credential stores
* filer: implement IAM Policy Management RPCs
* shell: add s3.policy command
* test: add integration test for s3.policy
* test: fix compilation errors in policy_test
* pb
* fmt
* test
* weed shell: add -policies flag to s3.configure
This allows linking/unlinking IAM policies to/from identities
directly from the s3.configure command.
* test: verify s3.configure policy linking and fix port allocation
- Added test case for linking policies to users via s3.configure
- Implemented findAvailablePortPair to ensure HTTP and gRPC ports
are both available, avoiding conflicts with randomized port assignments.
- Updated assertion to match jsonpb output (policyNames)
* credential: add StoreTypeGrpc constant
* credential: add IAM gRPC store boilerplate
* credential: implement identity methods in gRPC store
* credential: implement policy methods in gRPC store
* admin: use gRPC credential store for AdminServer
This ensures that all IAM and policy changes made through the Admin UI
are persisted via the Filer's IAM gRPC service instead of direct file manipulation.
* shell: s3.configure use granular IAM gRPC APIs instead of full config patching
* shell: s3.configure use granular IAM gRPC APIs
* shell: replace deprecated ioutil with os in s3.policy
* filer: use gRPC FailedPrecondition for unconfigured credential manager
* test: improve s3.policy integration tests and fix error checks
* ci: add s3 policy shell integration tests to github workflow
* filer: fix LoadCredentialConfiguration error handling
* credential/grpc: propagate unmarshal errors in GetPolicies
* filer/grpc: improve error handling and validation
* shell: use gRPC status codes in s3.configure
* credential: document PutPolicy as create-or-replace
* credential/postgres: reuse CreatePolicy in PutPolicy to deduplicate logic
* shell: add timeout context and strictly enforce flags in s3.policy
* iam: standardize policy content field naming in gRPC and proto
* shell: extract slice helper functions in s3.configure
* filer: map credential store errors to gRPC status codes
* filer: add input validation for UpdateUser and CreateAccessKey
* iam: improve validation in policy and config handlers
* filer: ensure IAM service registration by defaulting credential manager
* credential: add GetStoreName method to manager
* test: verify policy deletion in integration test
* Add AWS IAM integration tests and refactor admin authorization
- Added AWS IAM management integration tests (User, AccessKey, Policy)
- Updated test framework to support IAM client creation with JWT/OIDC
- Refactored s3api authorization to be policy-driven for IAM actions
- Removed hardcoded role name checks for admin privileges
- Added new tests to GitHub Actions basic test matrix
* test(s3/iam): add UpdateUser and UpdateAccessKey tests and fix nil pointer dereference
* feat(s3api): add DeletePolicy and update tests with cleanup logic
* test(s3/iam): use t.Cleanup for managed policy deletion in CreatePolicy test
* fix: IAM authentication with AWS Signature V4 and environment credentials
Three key fixes for authenticated IAM requests to work:
1. Fix request body consumption before signature verification
- iamMatcher was calling r.ParseForm() which consumed POST body
- This broke AWS Signature V4 verification on subsequent reads
- Now only check query string in matcher, preserving body for verification
- File: weed/s3api/s3api_server.go
2. Preserve environment variable credentials across config reloads
- After IAM mutations, config reload overwrote env var credentials
- Extract env var loading into loadEnvironmentVariableCredentials()
- Call after every config reload to persist credentials
- File: weed/s3api/auth_credentials.go
3. Add authenticated IAM tests and test infrastructure
- New TestIAMAuthenticated suite with AWS SDK + Signature V4
- Dynamic port allocation for independent test execution
- Flag reset to prevent state leakage between tests
- CI workflow to run S3 and IAM tests separately
- Files: test/s3/example/*, .github/workflows/s3-example-integration-tests.yml
All tests pass:
- TestIAMCreateUser (unauthenticated)
- TestIAMAuthenticated (with AWS Signature V4)
- S3 integration tests
* fmt
* chore: rename test/s3/example to test/s3/normal
* simplify: CI runs all integration tests in single job
* Update s3-example-integration-tests.yml
* ci: run each test group separately to avoid raft registry conflicts
