* fix: decrypt SSE-encrypted objects in S3 replication sink
* fix: add SSE decryption support to GCS, Azure, B2, Local sinks
* fix: return error instead of warning for SSE-C objects during replication
* fix: close readers after upload to prevent resource leaks
* fix: return error for unknown SSE types instead of passing through ciphertext
* refactor(repl_util): extract CloseReader/CloseMaybeDecryptedReader helpers
The io.Closer close-on-error and defer-close pattern was duplicated in
copyWithDecryption and the S3 sink. Extract exported helpers to keep a
single implementation and prevent future divergence.
* fix(repl_util): warn on mixed SSE types across chunks in detectSSEType
detectSSEType previously returned the SSE type of the first encrypted
chunk without inspecting the rest. If an entry somehow has chunks with
different SSE types, only the first type's decryption would be applied.
Now scans all chunks and logs a warning on mismatch.
* fix(repl_util): decrypt inline SSE objects during replication
Small SSE-encrypted objects stored in entry.Content were being copied
as ciphertext because:
1. detectSSEType only checked chunk metadata, but inline objects have
no chunks — now falls back to checking entry.Extended for SSE keys
2. Non-S3 sinks short-circuited on len(entry.Content)>0, bypassing
the decryption path — now call MaybeDecryptContent before writing
Adds MaybeDecryptContent helper for decrypting inline byte content.
* fix(repl_util): add KMS initialization for replication SSE decryption
SSE-KMS decryption was not wired up for filer.backup — the only
initialization was for SSE-S3 key manager. CreateSSEKMSDecryptedReader
requires a global KMS provider which is only loaded by the S3 API
auth-config path.
Add InitializeSSEForReplication helper that initializes both SSE-S3
(from filer KEK) and SSE-KMS (from Viper config [kms] section /
WEED_KMS_* env vars). Replace the SSE-S3-only init in filer_backup.go.
* fix(replicator): initialize SSE decryption for filer.replicate
The SSE decryption setup was only added to filer_backup.go, but the
notification-based replicator (filer.replicate) uses the same sinks
and was missing the required initialization. Add SSE init in
NewReplicator so filer.replicate can decrypt SSE objects.
* refactor(repl_util): fold entry param into CopyFromChunkViews
Remove the CopyFromChunkViewsWithEntry wrapper and add the entry
parameter directly to CopyFromChunkViews, since all callers already
pass it.
* fix(repl_util): guard SSE init with sync.Once, error on mixed SSE types
InitializeWithFiler overwrites the global superKey on every call.
Wrap InitializeSSEForReplication with sync.Once so repeated calls
(e.g. from NewReplicator) are safe.
detectSSEType now returns an error instead of logging a warning when
chunks have inconsistent SSE types, so replication aborts rather than
silently applying the wrong decryption to some chunks.
* fix(repl_util): allow SSE init retry, detect conflicting metadata, add tests
- Replace sync.Once with mutex+bool so transient failures (e.g. filer
unreachable) don't permanently prevent initialization. Only successful
init flips the flag; failed attempts allow retries.
- Remove v.IsSet("kms") guard that prevented env-only KMS configs
(WEED_KMS_*) from being detected. Always attempt KMS loading and let
LoadConfigurations handle "no config found".
- detectSSEType now checks for conflicting extended metadata keys
(e.g. both SeaweedFSSSES3Key and SeaweedFSSSEKMSKey present) and
returns an error instead of silently picking the first match.
- Add table-driven tests for detectSSEType, MaybeDecryptReader, and
MaybeDecryptContent covering plaintext, uniform SSE, mixed chunks,
inline SSE via extended metadata, conflicting metadata, and SSE-C.
* test(repl_util): add SSE-S3 and SSE-KMS integration tests
Add round-trip encryption/decryption tests:
- SSE-S3: encrypt with CreateSSES3EncryptedReader, decrypt with
CreateSSES3DecryptedReader, verify plaintext matches
- SSE-KMS: encrypt with AES-CTR, wire a mock KMSProvider via
SetGlobalKMSProvider, build serialized KMS metadata, verify
MaybeDecryptReader and MaybeDecryptContent produce correct plaintext
Fix existing tests to check io.ReadAll errors.
* test(repl_util): exercise full SSE-S3 path through MaybeDecryptReader
Replace direct CreateSSES3DecryptedReader calls with end-to-end tests
that go through MaybeDecryptReader → decryptSSES3 →
DeserializeSSES3Metadata → GetSSES3IV → CreateSSES3DecryptedReader.
Uses WEED_S3_SSE_KEK env var + a mock filer client to initialize the
global key manager with a test KEK, then SerializeSSES3Metadata to
build proper envelope-encrypted metadata. Cleanup restores the key
manager state.
* fix(localsink): write to temp file to prevent truncated replicas
The local sink truncated the destination file before writing content.
If decryption or chunk copy failed, the file was left empty/truncated,
destroying the previous replica.
Write to a temp file in the same directory and atomically rename on
success. On any error the temp file is cleaned up and the existing
replica is untouched.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* rename metadata events
* fix subscription filter to use NewEntry.Name for rename path matching
The server-side subscription filter constructed the new path using
OldEntry.Name instead of NewEntry.Name when checking if a rename
event's destination matches the subscriber's path prefix. This could
cause events to be incorrectly filtered when a rename changes the
file name.
* fix bucket events to handle rename of bucket directories
onBucketEvents only checked IsCreate and IsDelete. A bucket directory
rename via AtomicRenameEntry now emits a single rename event (both
OldEntry and NewEntry non-nil), which matched neither check. Handle
IsRename by deleting the old bucket and creating the new one.
* fix replicator to handle rename events across directory boundaries
Two issues fixed:
1. The replicator filtered events by checking if the key (old path)
was under the source directory. Rename events now use the old path
as key, so renames from outside into the watched directory were
silently dropped. Now both old and new paths are checked, and
cross-boundary renames are converted to create or delete.
2. NewParentPath was passed to the sink without remapping to the
sink's target directory structure, causing the sink to write
entries at the wrong location. Now NewParentPath is remapped
alongside the key.
* fix filer sync to handle rename events crossing directory boundaries
The early directory-prefix filter only checked resp.Directory (old
parent). Rename events now carry the old parent as Directory, so
renames from outside the source path into it were dropped before
reaching the existing cross-boundary handling logic. Check both old
and new directories against sourcePath and excludePaths so the
downstream old-key/new-key logic can properly convert these to
create or delete operations.
* fix metadata event path matching
* fix metadata event consumers for rename targets
* Fix replication rename target keys
Logical rename events now reach replication sinks with distinct source and target paths.\n\nHandle non-filer sinks as delete-plus-create on the translated target key, and make the rename fallback path create at the translated target key too.\n\nAdd focused tests covering non-filer renames, filer rename updates, and the fallback path.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Fix filer sync rename path scoping
Use directory-boundary matching instead of raw prefix checks when classifying source and target paths during filer sync.\n\nAlso apply excludePaths per side so renames across excluded boundaries downgrade cleanly to create/delete instead of being misclassified as in-scope updates.\n\nAdd focused tests for boundary matching and rename classification.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Fix replicator directory boundary checks
Use directory-boundary matching instead of raw prefix checks when deciding whether a source or target path is inside the watched tree or an excluded subtree.\n\nThis prevents sibling paths such as /foo and /foobar from being misclassified during rename handling, and preserves the earlier rename-target-key fix.\n\nAdd focused tests for boundary matching and rename classification across sibling/excluded directories.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Fix etc-remote rename-out handling
Use boundary-safe source/target directory membership when classifying metadata events under DirectoryEtcRemote.\n\nThis prevents rename-out events from being processed as config updates, while still treating them as removals where appropriate for the remote sync and remote gateway command paths.\n\nAdd focused tests for update/removal classification and sibling-prefix handling.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Defer rename events until commit
Queue logical rename metadata events during atomic and streaming renames and publish them only after the transaction commits successfully.\n\nThis prevents subscribers from seeing delete or logical rename events for operations that later fail during delete or commit.\n\nAlso serialize notification.Queue swaps in rename tests and add failure-path coverage.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Skip descendant rename target lookups
Avoid redundant target lookups during recursive directory renames once the destination subtree is known absent.\n\nThe recursive move path now inserts known-absent descendants directly, and the test harness exercises prefixed directory listing so the optimization is covered by a directory rename regression test.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Tighten rename review tests
Return filer_pb.ErrNotFound from the bucket tracking store test stub so it follows the FilerStore contract, and add a webhook filter case for same-name renames across parent directories.\n\nCo-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* fix HardLinkId format verb in InsertEntryKnownAbsent error
HardLinkId is a byte slice. %d prints each byte as a decimal number
which is not useful for an identifier. Use %x to match the log line
two lines above.
* only skip descendant target lookup when source and dest use same store
moveFolderSubEntries unconditionally passed skipTargetLookup=true for
every descendant. This is safe when all paths resolve to the same
underlying store, but with path-specific store configuration a child's
destination may map to a different backend that already holds an entry
at that path. Use FilerStoreWrapper.SameActualStore to check per-child
and fall back to the full CreateEntry path when stores differ.
* add nil and create edge-case tests for metadata event scope helpers
* extract pathIsEqualOrUnder into util.IsEqualOrUnder
Identical implementations existed in both replication/replicator.go and
command/filer_sync.go. Move to util.IsEqualOrUnder (alongside the
existing FullPath.IsUnder) and remove the duplicates.
* use MetadataEventTargetDirectory for new-side directory in filer sync
The new-side directory checks and sourceNewKey computation used
message.NewParentPath directly. If NewParentPath were empty (legacy
events, older filer versions during rolling upgrades), sourceNewKey
would be wrong (/filename instead of /dir/filename) and the
UpdateEntry parent path rewrite would panic on slice bounds.
Derive targetDir once from MetadataEventTargetDirectory, which falls
back to resp.Directory when NewParentPath is empty, and use it
consistently for all new-side checks and the sink parent path.
