* Give the `ScrubVolume()` RPC an option to flag found broken volumes as read-only.
Also exposes this option in the shell `volume.scrub` command.
* Remove redundant test in `TestVolumeMarkReadonlyWritableErrorPaths`.
417051bb slightly rearranges the logic for `VolumeMarkReadonly()` and `VolumeMarkWritable()`,
so calling them for invalid volume IDs will actually yield that error, instead of checking
maintnenance mode first.
* improve large file sync throughput for remote.cache and filer.sync
Three main throughput improvements:
1. Adaptive chunk sizing for remote.cache: targets ~32 chunks per file
instead of always starting at 5MB. A 500MB file now uses ~16MB chunks
(32 chunks) instead of 5MB chunks (100 chunks), reducing per-chunk
overhead (volume assign, gRPC call, needle write) by 3x.
2. Configurable concurrency at every layer:
- remote.cache chunk concurrency: -chunkConcurrency flag (default 8)
- remote.cache S3 download concurrency: -downloadConcurrency flag
(default raised from 1 to 5 per chunk)
- filer.sync chunk concurrency: -chunkConcurrency flag (default 32)
3. S3 multipart download concurrency raised from 1 to 5: the S3 manager
downloader was using Concurrency=1, serializing all part downloads
within each chunk. This alone can 5x per-chunk download speed.
The concurrency values flow through the gRPC request chain:
shell command → CacheRemoteObjectToLocalClusterRequest →
FetchAndWriteNeedleRequest → S3 downloader
Zero values in the request mean "use server defaults", maintaining
full backward compatibility with existing callers.
Ref #8481
* fix: use full maxMB for chunk size cap and remove loop guard
Address review feedback:
- Use full maxMB instead of maxMB/2 for maxChunkSize to avoid
unnecessarily limiting chunk size for very large files.
- Remove chunkSize < maxChunkSize guard from the safety loop so it
can always grow past maxChunkSize when needed to stay under 1000
chunks (e.g., extremely large files with small maxMB).
* address review feedback: help text, validation, naming, docs
- Fix help text for -chunkConcurrency and -downloadConcurrency flags
to say "0 = server default" instead of advertising specific numeric
defaults that could drift from the server implementation.
- Validate chunkConcurrency and downloadConcurrency are within int32
range before narrowing, returning a user-facing error if out of range.
- Rename ReadRemoteErr to readRemoteErr to follow Go naming conventions.
- Add doc comment to SetChunkConcurrency noting it must be called
during initialization before replication goroutines start.
- Replace doubling loop in chunk size safety check with direct
ceil(remoteSize/1000) computation to guarantee the 1000-chunk cap.
* address Copilot review: clamp concurrency, fix chunk count, clarify proto docs
- Use ceiling division for chunk count check to avoid overcounting
when file size is an exact multiple of chunk size.
- Clamp chunkConcurrency (max 1024) and downloadConcurrency (max 1024
at filer, max 64 at volume server) to prevent excessive goroutines.
- Always use ReadFileWithConcurrency when the client supports it,
falling back to the implementation's default when value is 0.
- Clarify proto comments that download_concurrency only applies when
the remote storage client supports it (currently S3).
- Include specific server defaults in help text (e.g., "0 = server
default 8") so users see the actual values in -h output.
* fix data race on executionErr and use %w for error wrapping
- Protect concurrent writes to executionErr in remote.cache worker
goroutines with a sync.Mutex to eliminate the data race.
- Use %w instead of %v in volume_grpc_remote.go error formatting
to preserve the error chain for errors.Is/errors.As callers.
* Add a version token on `GetState()`/`SetState()` RPCs for volume server states.
* Make state version a property ov `VolumeServerState` instead of an in-memory counter.
Also extend state atomicity to reads, instead of just writes.
* Implement RPC skeleton for regular/EC volumes scrubbing.
See https://github.com/seaweedfs/seaweedfs/issues/8018 for details.
* Minor proto improvements for `ScrubVolume()`, `ScrubEcVolume()`:
- Add fields for scrubbing details in `ScrubVolumeResponse` and `ScrubEcVolumeResponse`,
instead of reporting these through RPC errors.
- Return a list of broken shards when scrubbing EC volumes, via `EcShardInfo'.
* Boostrap persistent state for volume servers.
This PR implements logic load/save persistent state information for storages
associated with volume servers, and reporting state changes back to masters
via heartbeat messages.
More work ensues!
See https://github.com/seaweedfs/seaweedfs/issues/7977 for details.
* Add volume server RPCs to read and update state flags.
This PR implements logic load/save persistent state information for storages
associated with volume servers, and reporting state changes back to masters
via heartbeat messages.
More work ensues!
See https://github.com/seaweedfs/seaweedfs/issues/7977 for details.
* refactor: add ECContext structure to encapsulate EC parameters
- Create ec_context.go with ECContext struct
- NewDefaultECContext() creates context with default 10+4 configuration
- Helper methods: CreateEncoder(), ToExt(), String()
- Foundation for cleaner function signatures
- No behavior change, still uses hardcoded 10+4
* refactor: update ec_encoder.go to use ECContext
- Add WriteEcFilesWithContext() and RebuildEcFilesWithContext() functions
- Keep old functions for backward compatibility (call new versions)
- Update all internal functions to accept ECContext parameter
- Use ctx.DataShards, ctx.ParityShards, ctx.TotalShards consistently
- Use ctx.CreateEncoder() instead of hardcoded reedsolomon.New()
- Use ctx.ToExt() for shard file extensions
- No behavior change, still uses default 10+4 configuration
* refactor: update ec_volume.go to use ECContext
- Add ECContext field to EcVolume struct
- Initialize ECContext with default configuration in NewEcVolume()
- Update LocateEcShardNeedleInterval() to use ECContext.DataShards
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* refactor: add EC shard count fields to VolumeInfo protobuf
- Add data_shards_count field (field 8) to VolumeInfo message
- Add parity_shards_count field (field 9) to VolumeInfo message
- Fields are optional, 0 means use default (10+4)
- Backward compatible: fields added at end
- Phase 1: Foundation for future customization
* refactor: regenerate protobuf Go files with EC shard count fields
- Regenerated volume_server_pb/*.go with new EC fields
- DataShardsCount and ParityShardsCount accessors added to VolumeInfo
- No behavior change, fields not yet used
* refactor: update VolumeEcShardsGenerate to use ECContext
- Create ECContext with default configuration in VolumeEcShardsGenerate
- Use ecCtx.TotalShards and ecCtx.ToExt() in cleanup
- Call WriteEcFilesWithContext() instead of WriteEcFiles()
- Save EC configuration (DataShardsCount, ParityShardsCount) to VolumeInfo
- Log EC context being used
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* fmt
* refactor: update ec_test.go to use ECContext
- Update TestEncodingDecoding to create and use ECContext
- Update validateFiles() to accept ECContext parameter
- Update removeGeneratedFiles() to use ctx.TotalShards and ctx.ToExt()
- Test passes with default 10+4 configuration
* refactor: use EcShardConfig message instead of separate fields
* optimize: pre-calculate row sizes in EC encoding loop
* refactor: replace TotalShards field with Total() method
- Remove TotalShards field from ECContext to avoid field drift
- Add Total() method that computes DataShards + ParityShards
- Update all references to use ctx.Total() instead of ctx.TotalShards
- Read EC config from VolumeInfo when loading EC volumes
- Read data shard count from .vif in VolumeEcShardsToVolume
- Use >= instead of > for exact boundary handling in encoding loops
* optimize: simplify VolumeEcShardsToVolume to use existing EC context
- Remove redundant CollectEcShards call
- Remove redundant .vif file loading
- Use v.ECContext.DataShards directly (already loaded by NewEcVolume)
- Slice tempShards instead of collecting again
* refactor: rename MaxShardId to MaxShardCount for clarity
- Change from MaxShardId=31 to MaxShardCount=32
- Eliminates confusing +1 arithmetic (MaxShardId+1)
- More intuitive: MaxShardCount directly represents the limit
fix: support custom EC ratios beyond 14 shards in VolumeEcShardsToVolume
- Add MaxShardId constant (31, since ShardBits is uint32)
- Use MaxShardId+1 (32) instead of TotalShardsCount (14) for tempShards buffer
- Prevents panic when slicing for volumes with >14 total shards
- Critical fix for custom EC configurations like 20+10
* fix: add validation for EC shard counts from VolumeInfo
- Validate DataShards/ParityShards are positive and within MaxShardCount
- Prevent zero or invalid values that could cause divide-by-zero
- Fallback to defaults if validation fails, with warning log
- VolumeEcShardsGenerate now preserves existing EC config when regenerating
- Critical safety fix for corrupted or legacy .vif files
* fix: RebuildEcFiles now loads EC config from .vif file
- Critical: RebuildEcFiles was always using default 10+4 config
- Now loads actual EC config from .vif file when rebuilding shards
- Validates config before use (positive shards, within MaxShardCount)
- Falls back to default if .vif missing or invalid
- Prevents data corruption when rebuilding custom EC volumes
* add: defensive validation for dataShards in VolumeEcShardsToVolume
- Validate dataShards > 0 and <= MaxShardCount before use
- Prevents panic from corrupted or uninitialized ECContext
- Returns clear error message instead of panic
- Defense-in-depth: validates even though upstream should catch issues
* fix: replace TotalShardsCount with MaxShardCount for custom EC ratio support
Critical fixes to support custom EC ratios > 14 shards:
disk_location_ec.go:
- validateEcVolume: Check shards 0-31 instead of 0-13 during validation
- removeEcVolumeFiles: Remove shards 0-31 instead of 0-13 during cleanup
ec_volume_info.go ShardBits methods:
- ShardIds(): Iterate up to MaxShardCount (32) instead of TotalShardsCount (14)
- ToUint32Slice(): Iterate up to MaxShardCount (32)
- IndexToShardId(): Iterate up to MaxShardCount (32)
- MinusParityShards(): Remove shards 10-31 instead of 10-13 (added note about Phase 2)
- Minus() shard size copy: Iterate up to MaxShardCount (32)
- resizeShardSizes(): Iterate up to MaxShardCount (32)
Without these changes:
- Custom EC ratios > 14 total shards would fail validation on startup
- Shards 14-31 would never be discovered or cleaned up
- ShardBits operations would miss shards >= 14
These changes are backward compatible - MaxShardCount (32) includes
the default TotalShardsCount (14), so existing 10+4 volumes work as before.
* fix: replace TotalShardsCount with MaxShardCount in critical data structures
Critical fixes for buffer allocations and loops that must support
custom EC ratios up to 32 shards:
Data Structures:
- store_ec.go:354: Buffer allocation for shard recovery (bufs array)
- topology_ec.go:14: EcShardLocations.Locations fixed array size
- command_ec_rebuild.go:268: EC shard map allocation
- command_ec_common.go:626: Shard-to-locations map allocation
Shard Discovery Loops:
- ec_task.go:378: Loop to find generated shard files
- ec_shard_management.go: All 8 loops that check/count EC shards
These changes are critical because:
1. Buffer allocations sized to 14 would cause index-out-of-bounds panics
when accessing shards 14-31
2. Fixed arrays sized to 14 would truncate shard location data
3. Loops limited to 0-13 would never discover/manage shards 14-31
Note: command_ec_encode.go:208 intentionally NOT changed - it creates
shard IDs to mount after encoding. In Phase 1 we always generate 14
shards, so this remains TotalShardsCount and will be made dynamic in
Phase 2 based on actual EC context.
Without these fixes, custom EC ratios > 14 total shards would cause:
- Runtime panics (array index out of bounds)
- Data loss (shards 14-31 never discovered/tracked)
- Incomplete shard management (missing shards not detected)
* refactor: move MaxShardCount constant to ec_encoder.go
Moved MaxShardCount from ec_volume_info.go to ec_encoder.go to group it
with other shard count constants (DataShardsCount, ParityShardsCount,
TotalShardsCount). This improves code organization and makes it easier
to understand the relationship between these constants.
Location: ec_encoder.go line 22, between TotalShardsCount and MinTotalDisks
* improve: add defensive programming and better error messages for EC
Code review improvements from CodeRabbit:
1. ShardBits Guardrails (ec_volume_info.go):
- AddShardId, RemoveShardId: Reject shard IDs >= MaxShardCount
- HasShardId: Return false for out-of-range shard IDs
- Prevents silent no-ops from bit shifts with invalid IDs
2. Future-Proof Regex (disk_location_ec.go):
- Updated regex from \.ec[0-9][0-9] to \.ec\d{2,3}
- Now matches .ec00 through .ec999 (currently .ec00-.ec31 used)
- Supports future increases to MaxShardCount beyond 99
3. Better Error Messages (volume_grpc_erasure_coding.go):
- Include valid range (1..32) in dataShards validation error
- Helps operators quickly identify the problem
4. Validation Before Save (volume_grpc_erasure_coding.go):
- Validate ECContext (DataShards > 0, ParityShards > 0, Total <= MaxShardCount)
- Log EC config being saved to .vif for debugging
- Prevents writing invalid configs to disk
These changes improve robustness and debuggability without changing
core functionality.
* fmt
* fix: critical bugs from code review + clean up comments
Critical bug fixes:
1. command_ec_rebuild.go: Fixed indentation causing compilation error
- Properly nested if/for blocks in registerEcNode
2. ec_shard_management.go: Fixed isComplete logic incorrectly using MaxShardCount
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Default 10+4 volumes were being incorrectly reported as incomplete
- Missing shards 14-31 were being incorrectly reported as missing
- Fixed in 4 locations: volume completeness checks and getMissingShards
3. ec_volume_info.go: Fixed MinusParityShards removing too many shards
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Was incorrectly removing shard IDs 10-31 instead of just 10-13
Comment cleanup:
- Removed Phase 1/Phase 2 references (development plan context)
- Replaced with clear statements about default 10+4 configuration
- SeaweedFS repo uses fixed 10+4 EC ratio, no phases needed
Root cause: Over-aggressive replacement of TotalShardsCount with MaxShardCount.
MaxShardCount (32) is the limit for buffer allocations and shard ID loops,
but TotalShardsCount (14) must be used for default EC configuration logic.
* fix: add defensive bounds checks and compute actual shard counts
Critical fixes from code review:
1. topology_ec.go: Add defensive bounds checks to AddShard/DeleteShard
- Prevent panic when shardId >= MaxShardCount (32)
- Return false instead of crashing on out-of-range shard IDs
2. command_ec_common.go: Fix doBalanceEcShardsAcrossRacks
- Was using hardcoded TotalShardsCount (14) for all volumes
- Now computes actual totalShardsForVolume from rackToShardCount
- Fixes incorrect rebalancing for volumes with custom EC ratios
- Example: 5+2=7 shards would incorrectly use 14 as average
These fixes improve robustness and prepare for future custom EC ratios
without changing current behavior for default 10+4 volumes.
Note: MinusParityShards and ec_task.go intentionally NOT changed for
seaweedfs repo - these will be enhanced in seaweed-enterprise repo
where custom EC ratio configuration is added.
* fmt
* style: make MaxShardCount type casting explicit in loops
Improved code clarity by explicitly casting MaxShardCount to the
appropriate type when used in loop comparisons:
- ShardId comparisons: Cast to ShardId(MaxShardCount)
- uint32 comparisons: Cast to uint32(MaxShardCount)
Changed in 5 locations:
- Minus() loop (line 90)
- ShardIds() loop (line 143)
- ToUint32Slice() loop (line 152)
- IndexToShardId() loop (line 219)
- resizeShardSizes() loop (line 248)
This makes the intent explicit and improves type safety readability.
No functional changes - purely a style improvement.
* initial design
* added simulation as tests
* reorganized the codebase to move the simulation framework and tests into their own dedicated package
* integration test. ec worker task
* remove "enhanced" reference
* start master, volume servers, filer
Current Status
✅ Master: Healthy and running (port 9333)
✅ Filer: Healthy and running (port 8888)
✅ Volume Servers: All 6 servers running (ports 8080-8085)
🔄 Admin/Workers: Will start when dependencies are ready
* generate write load
* tasks are assigned
* admin start wtih grpc port. worker has its own working directory
* Update .gitignore
* working worker and admin. Task detection is not working yet.
* compiles, detection uses volumeSizeLimitMB from master
* compiles
* worker retries connecting to admin
* build and restart
* rendering pending tasks
* skip task ID column
* sticky worker id
* test canScheduleTaskNow
* worker reconnect to admin
* clean up logs
* worker register itself first
* worker can run ec work and report status
but:
1. one volume should not be repeatedly worked on.
2. ec shards needs to be distributed and source data should be deleted.
* move ec task logic
* listing ec shards
* local copy, ec. Need to distribute.
* ec is mostly working now
* distribution of ec shards needs improvement
* need configuration to enable ec
* show ec volumes
* interval field UI component
* rename
* integration test with vauuming
* garbage percentage threshold
* fix warning
* display ec shard sizes
* fix ec volumes list
* Update ui.go
* show default values
* ensure correct default value
* MaintenanceConfig use ConfigField
* use schema defined defaults
* config
* reduce duplication
* refactor to use BaseUIProvider
* each task register its schema
* checkECEncodingCandidate use ecDetector
* use vacuumDetector
* use volumeSizeLimitMB
* remove
remove
* remove unused
* refactor
* use new framework
* remove v2 reference
* refactor
* left menu can scroll now
* The maintenance manager was not being initialized when no data directory was configured for persistent storage.
* saving config
* Update task_config_schema_templ.go
* enable/disable tasks
* protobuf encoded task configurations
* fix system settings
* use ui component
* remove logs
* interface{} Reduction
* reduce interface{}
* reduce interface{}
* avoid from/to map
* reduce interface{}
* refactor
* keep it DRY
* added logging
* debug messages
* debug level
* debug
* show the log caller line
* use configured task policy
* log level
* handle admin heartbeat response
* Update worker.go
* fix EC rack and dc count
* Report task status to admin server
* fix task logging, simplify interface checking, use erasure_coding constants
* factor in empty volume server during task planning
* volume.list adds disk id
* track disk id also
* fix locking scheduled and manual scanning
* add active topology
* simplify task detector
* ec task completed, but shards are not showing up
* implement ec in ec_typed.go
* adjust log level
* dedup
* implementing ec copying shards and only ecx files
* use disk id when distributing ec shards
🎯 Planning: ActiveTopology creates DestinationPlan with specific TargetDisk
📦 Task Creation: maintenance_integration.go creates ECDestination with DiskId
🚀 Task Execution: EC task passes DiskId in VolumeEcShardsCopyRequest
💾 Volume Server: Receives disk_id and stores shards on specific disk (vs.store.Locations[req.DiskId])
📂 File System: EC shards and metadata land in the exact disk directory planned
* Delete original volume from all locations
* clean up existing shard locations
* local encoding and distributing
* Update docker/admin_integration/EC-TESTING-README.md
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* check volume id range
* simplify
* fix tests
* fix types
* clean up logs and tests
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix nomore writables volumes while disk free space is sufficient by time delay
* reset
---------
Co-authored-by: wang wusong <wangwusong@virtaitech.com>
This is useful for doing backups on the data so we can accurately store the
last modified time, the compression state, and verify the crc.
Previously we were doing VolumeNeedleStatus and then an HTTP request which
needlessly read from the dat file twice.
* refactor(pb): `quote_charactoer` -> `quote_character`
Signed-off-by: Ryan Russell <git@ryanrussell.org>
* refactor(volume_server): `QuoteCharactoer` -> `QuoteCharacter`
Signed-off-by: Ryan Russell <git@ryanrussell.org>
* refactor(volume_server): `quoteCharactoer` -> `quoteCharacter`
Signed-off-by: Ryan Russell <git@ryanrussell.org>
Signed-off-by: Ryan Russell <git@ryanrussell.org>
* feat(weed.move): add a speed limit parameter of moving files
* fix(weed.move): set the default value of ioBytePerSecond to vs.compactionBytePerSecond
Co-authored-by: zhihao.qu <zhihao.qu@ly.com>
